472843
42
Zoom out
Zoom in
Previous page
1/52
Next page
42
qw
e
Embroidery
Machine setting
q Stitch selector:
w Presser foot: Remove
e Thread tension dial: 2-6
r Feed dogs Dropped
Drop the feed dogs and remove the foot holder.
Draw a design on the fabric with tailor's chalk.
Stretch the fabric between embroidery hoops, and place
the hoops under the needle.
Lower the presser foot lifter to engage the needle thread
tension.
Holding the needle thread in your left hand, rotate the
handwheel towards you one complete turn. Pull the
needle thread to draw the bobbin thread to the right side
of the fabric.
At medium speed, stitch along the marked outline,
guiding the fabric carefully by hand.
After embroidery is completed, raise the feed dogs for
normal sewing.
r
qw e
Shell Tuck
Machine setting:
q Stitch selector:
w Presser foot: Zigzag foot A
e Thread tension dial: 6-8
Use a lightweight fabric (tricot, for example).
Fold the fabric on the bias and stitch on the fold.
Allow the needle to just clear the folded edge to create a
shelled edge. You may need to increase the needle
thread tension slightly.
If you sew rows of shell stitches, space the rows at least
5/8˝ (1.5 cm) apart. You can also sew shell stitches on
knits or soft silky woven fabrics, in any direction.
SECTION 5. DECORATIVE STITCHING
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome Jem Gold 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome Jem Gold 3 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info