472819
92
Zoom out
Zoom in
Previous page
1/96
Next page
90
Problems and Warning Signals
If a buzzer sounds and the LCD screen shows a warning sign, follow the guidance below.
The machine will stop if the buttonhole is sewn without
lowering the buttonhole lever.
The foot control is disconnected while sewing.
The machine is started without lowering the presser
foot.
The machine will stop if the presser foot is raised while
sewing.
The power is turned on while depressing the foot
control.
The foot control is released or the start/stop button is
pressed while sewing a locking stitch.
The power is turned on with the needle in the down
position.
The auto thread cutter button is pressed while the
machine is still initializing after turning the
power on. Or, the thread cutter button is pressed 4
times in a row.
The start/stop button is pressed with the foot control
connected.
Connect the foot control
and start the machine
again.
Disconnect the foot control.
Release the foot control.
Tu rn the hand wheel to
raise the needle.
Lower the presser foot and
start the machine.
Lower the presser foot and
start the machine again.
Lower the buttonhole lever
and start the machine
again.
Start the machine again to
let the machine stop
automatically.
Press the thread cutter
button after the machine
stops.
The bobbin winder spindle is shifted to the right.
Shift the bobbin winder
spindle to the left for
stitching.
The twin needle button is pressed when a pattern
unsuitable for twin needle sewing has been selected.
Select the pattern suitable
for twin needle sewing.
Warning Sign
Cause
Try this
92


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome Horizon 7700QCP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome Horizon 7700QCP in the language / languages: English as an attachment in your email.

The manual is 5,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info