472819
91
Zoom out
Zoom in
Previous page
1/96
Next page
89
Cleaning the Hook Race, Feed Dog and Thread
Cutter Mechanism
WARNING:
Turn the power switch off and unplug the machine before
cleaning.
CAUTION:
Make sure to open the automatic needle converter
before removing the needle plate.
NOTE:
Do not dismantle the machine in any way other than
what is explained on this page.
z Remove the needle and presser foot. Remove the
setscrews and remove the needle plate.
1 Screwdriver
2 Setscrew
3 Needle plate
x Ta ke out the bobbin. Lift up the bobbin holder and
remove it.
4 Bobbin holder
c Clean the bobbin holder with the lint brush and a soft
dry cloth.
5 Lint brush
v Clean the feed dog, thread cutter mechanism and
hook race with the lint brush.
6Feed dog
7 Thread cutter mechanism
8 Hook race
b Clean the hook race with a dry cloth.
Reattaching Bobbin Holder and Needle Plate
n Insert the bobbin holder. The knob of the bobbin
holder should fit next to the stopper on the hook race.
Be sure to align the triangle marks on the bobbin
holder and stopper.
9 Knob
10 Stopper
11 Tr iangle marks
m Reattach the needle plate and tighten the screws.
NOTE:
After cleaning the machine, insert the needle and attach
the presser foot.
z
x
c
v
b
n
m
1
2
2
3
4
5
6
7
8
9
10
11
91


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome Horizon 7700QCP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome Horizon 7700QCP in the language / languages: English as an attachment in your email.

The manual is 5,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info