Manual Janome Horizon 7700QCP (page 56 of 96) (English)

472819

Zoom out

Zoom in

1/96

Corded buttonhole

Machine settings

Pattern 23 (Buttonhole)

Thread tension: AUTO

Presser foot: Automatic buttonhole foot R

Foot pressure: 7

With the automatic buttonhole foot R raised, hook the

filler cord on the spur at the back of the buttonhole foot

1 Spur

Bring the ends of the cord toward you under the

buttonhole foot clearing the front end.

Hook the ends of the filler cord into the forks on the front

of the buttonhole foot to hold them tight.

2 Forks

To sew a corded buttonhole, follow the same procedure

as a sensor buttonhole.

Lower the needle into the fabric where the buttonhole will

start and start sewing.

The sewing procedure is the same as the square

(sensor) buttonhole.

Remove the fabric from the machine.

Cut the filler cord at both ends.

To cut the buttonhole opening, refer to page 53.

NOTE:

Set the stitch width in accordance with the thickness of

filler cord used.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Janome Horizon 7700QCP in the language / languages: English as an attachment in your email.

The manual is 5,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Janome Horizon 7700QCP Manual

Product: