Manual Janome Horizon 7700QCP (page 55 of 96) (English)

472819

Zoom out

Zoom in

1/96

b Start the machine to sew the buttonhole.

The machine will sew the left row first.

n Then it goes to the end point with straight stitches.

The machine will sew the back bartack and the right

row.

m Finally, the machine will sew the front bartack and

stop automatically.

To sew another buttonhole, press the thread cutter button

and raise the presser foot. Move the fabric to where the

next buttonhole is to be sewn, then lower the foot and

start the machine.

Double layer buttonhole

To make a solid and sturdy buttonhole, sew another layer

of buttonhole over the previous stitches.

After the buttonhole is finished, simply start the machine

again. Do not raise the foot or buttonhole lever.

, When buttonhole sewing is finished, push the

buttonhole lever upward as far as it will go.

11 Buttonhole lever

. Remove the fabric and place a pin just below the

bartack at each end to prevent accidentally cutting

stitches. Cut the opening with the seam ripper.

12 Pin

13 Seam ripper

NOTE:

If the dual feed device interferes when pressing the red

button, shift the dual feed device away.

14 Dual feed device

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Janome Horizon 7700QCP in the language / languages: English as an attachment in your email.

The manual is 5,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Janome Horizon 7700QCP Manual

Product: