472834
52
Zoom out
Zoom in
Previous page
1/56
Next page
50
Condition
Seam Puckering.
Stitches form loo
ps
below the work.
The cloth is not
feeding smoothly.
The machine does not
work.
The buttonho
le
stitches are not
balanced.
Cause
1. The needle thread tension is too tight.
2. The needle thread is not threaded correctly.
3. The needle is too heavy for the cloth being sewn.
4. The stitches are too coarse for the fabric being sewn.
5. The presser foot pressure is not correctly adjusted.
* When sewing extremely light weight materials, place a sheet of paper underneath the fabric.
1. The needle thread tension is too loos
e.
2. The needle is either too heavy or too fine for the thread.
1. The feed dog is packed with lin
t.
2. The presser foot pressure is too weak.
3. The stitches are too fine.
4. The feed dog is not raised afte
r “Drop feed” has been used.
1. The machine is not plugged i
n.
2. A thread is caught in the hook race.
3. Clutch knob is pulled away for the bobbin winding.
4. Bobbin winder spindle is in the winding position.
1. The stitch length is not suitable for the fabric being sew
n.
2. The work is being pulled or held back.
3. Interfacing is not used with stretch fine fabric
s.
Reference
See Page 21
See Page 18
See Page 14
Make the stitches
denser.
See Page 10
Se
e Page 21
See Page 14
Se
e Page 48
See Page 10
Make the stitches
coarser.
See Page 10
See Page
8
See Page 48
See Page 16
See Page 16
See Page 29,32 and
34
Do not force the fabric
for guiding.
See Page 29
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome HD3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome HD3000 in the language / languages: English as an attachment in your email.

The manual is 10,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info