472834
51
Zoom out
Zoom in
Previous page
1/56
Next page
49
Trouble Shooting
Condition
The machine does n
ot
run smoothly and is
noisy.
The needle thread
breaks.
The bobbin thread
breaks.
The needle break
s.
Skipped stitches.
Cause
1. Threads have been caught in hook mechanis
m.
2. The feed dog is packed with lint.
1. The needle thread is not threaded properl
y.
2. The needle thread tension is too tight.
3. The needle is bent or blunt.
4. The needle is incorrectly inserted.
5. The fabric is not being drawn to the rear when sewing is finished.
6. The thread is either too heavy or too fine for the needle.
1. The bobbin thread is not threaded properly in the bobbin holde
r.
2. Lint has collected in the bobbin holder.
3. The bobbin is damaged and does not turn smoothly.
1. The needle is incorrectly inserte
d.
2. The needle is bent or blunt.
3. The needle clamp screw is loose.
4. The tension of the needle thread is too tight.
5. The fabric is not drawn to the rear when sewing is finished.
6. The needle is too fine for the fabric being sewn.
7. The pattern selector dial has been turned while the needle was in the material.
1. The needle is incorrectly inserted.
2. The needle is bent or blunt.
3. The needle and/or threads are not suitable for the work being sewn.
4. A BLUE TIPPED
needle is not being used for sewing stretch, very fine fabrics and synthetics.
5. The needle thread is not threaded properly.
6. The presser foot pressure is not strong enough.
Reference
See Pages 47 and
48
See Page 48
Se
e Page 18
See Page 21
See Page 13
See Page 13
See Page 23
See Page 14
Se
e Page 17
See Page 47
Exchange bobbin.
Se
e Page 13
See Page 13
See Page 13
See Page 21
See Page 23
See Page 14
See Page 22
See Page 13
See Page 13
See Page 14
See Page 14
See Page 18
See Page 10
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome HD3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome HD3000 in the language / languages: English as an attachment in your email.

The manual is 10,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info