472825
30
Zoom out
Zoom in
Previous page
1/60
Next page
26
Overcasting
q Stitch pattern: 04
w Needle thread tension: 3 to 7
e Presser foot: Overedge foot: C
Tricot stitch
q Stitch pattern: 05
w Needle thread tension: 3 to 6
e Presser foot: Zigzag foot: A
z x c
qwe
qwe
Knit stitch
q Stitch pattern: 09
w Needle thread tension: 3 to 6
e Presser foot: Zigzag foot: A
Place your fabric to allow a 5/8˝ (1.5 cm) seam. Trim excess
close to stitching. Be careful not to cut the stitches.
qwe
This stitch is used to finish the seam allowance on
synthetics and other fabrics that tend to pucker. The stitch
is also excellent for darning and mending tears.
Place your fabric to allow a 5/8˝ (1.5 cm) seam. Trim
excess close to stitching. Be careful not to cut the stitches.
This zigzag variation is very useful in garment construction
and in finishing raw edges of any sewing project.
z The black ridge and the guide wires on the overedge
foot keep the edge neat and the fabric straight.
x Place your fabric so that the double guide wires come to
the edge. The machine will stitch over these wires. The
black ridge will keep the loose threads in so that the
needle can stitch over them.
c As you sew, be sure your fabric edge pushes up against
the black ridge.
NOTE:
When using an Overedge foot, make sure to set the stitch
width at 5 and 7, otherwise the needle may hit the
overedge foot.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome DC5100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome DC5100 in the language / languages: English as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info