472825
29
Zoom out
Zoom in
Previous page
1/60
Next page
25
Auto-lock stitch
q Stitch pattern: 10
w Needle thread tension: 2 to 6
e Presser foot: Zigzag foot: A
r Presser foot: Straight foot: H
Lower the needle close to the front edge of the fabric and
lower the presser foot. The machine will sew several
locking stitches in place and continue sewing forward.
By pressing the reverse button, the machine will sew
several locking stitches in place, then stop sewing
automatically.
Saddle stitch
q Stitch pattern: 35
w Needle thread tension: 3 to 6
e Presser foot: Zigzag foot: A
r Presser foot: Straight foot: H
This saddle stitch is formed with one stitch forward, two
stitches backward, and a fourth stitch forward.
You can achieve a lovely hand-worked look when
topstitching suits, blazers, jumpers, and denim outfits with
the saddle stitch.
Zigzag stitch
q Stitch pattern: 04
w Needle thread tension: 3 to 7
e Presser foot: Zigzag foot* A
r Pre-programmed settings
•To change the width and length
Zigzag stitch is useful for overcasting, applique, mending
etc. When you change the zigzag width, make sure the
needle position is above the fabric.
z When you select the stitch, display shows
pre-programmed stitch length and width settings r.
Press the zigzag width key “+”, “–” or stitch length key
“+”, “–” to change the stitch width and length manually.
x When the “+” or “–” key is pressed, the width and length
will be changed accordingly.
q Narrow width (small number)
w Wide width (large number)
e Dense stitch (small number)
r Coarse stitch (large number)
t Width
y Length
NOTE:
When using the straight stitch foot, make sure to use
center needle position. Otherwise the needle may strike
the sewing foot and possibly break.
NOTE:
When using the straight stitch foot, make sure to use
center needle position. Otherwise the needle may strike
the sewing foot and possibly break.
q wer
q wer
qwe
qw er
ty
z x
r
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome DC5100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome DC5100 in the language / languages: English as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info