472831
16
Zoom out
Zoom in
Previous page
1/43
Next page
14
z
x
c
q
w
r
q
w
t
e
Drawing Up Bobbin Thread
z Raise the presser foot. Hold the needle thread lightly
with your left hand.
q
Adjust the Needle Thread Tension for a Straight
Stitch
•Auto-thread tension
This machine features the Auto setting in the tension
control, which covers wide range of sewing condition.
Set the tension control dial at “A” for general sewing,
unless specifically indicated in this manual.
• Correct tension
q Needle thread (Top thread)
w Bobbin thread (Bottom thread)
e To loosen
r To tighten
The ideal straight stitch has threads locked between two
layers of fabric, as illustrated (magnified to show detail).
If you look at the top and bottom of a seam, notice that
the stitches are evenly balanced.
When adjusting the needle thread tension, the higher the
number, the tighter the top thread tension.
Results depend on:
- stiffness and thickness of the fabric
- number of fabric layers
- type of stitch
•Tension is too tight
q Needle thread (Top thread)
w Bobbin thread (Bottom thread)
e To loosen tension
r Right side (Top side) of fabric
t Wrong side (Bottom side) of fabric
If the needle thread tension is too tight, the bobbin
thread is pulled up and will appear on the right side of
the fabric. Turn the dial to a lower tension setting number
to loosen the needle thread tension.
x Press the up/down needle position button q twice to
lower and raise the needle to pick up the bobbin thread.
q Up/down needle position button
c Pull both threads 4˝ to 6˝ (10 to 15 cm) under and
behind the presser foot.
e
r
16


Need help? Post your question in this forum.

Forumrules
1

Forum

janome-dc4030

Reset search

  • i just got a janome model DC4030PR is the same as the DC4030 thanks Submitted on 30-1-2024 at 01:14

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome DC4030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome DC4030 in the language / languages: English as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Janome DC4030

Janome DC4030 User Manual - Dutch - 43 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info