602047
40
Zoom out
Zoom in
Previous page
1/94
Next page
34
Using the Seam Guides
The seam guides on the needle plate are engraved to
help you measure seam allowance. The numbers on
the needle plate indicate the distance between the
center needle position and the edge of the fabric. The
lines are 1/8˝ (0.3 cm) apart, and engraved at 3/8˝,
4/8˝, 5/8˝ and 6/8˝. The lines in millimeters are 5 mm
apart, and are engraved at 10 mm, 15 mm and 20 mm.
q Seam guides
w Needle drop position
e Seam allowance
q
e
w
q
Sewing from the Edge of Thick Fabric
The black button locks the zigzag foot to avoid
slipping when sewing from the extreme edge or
sewing across the hem.
z Lower the needle into the fabric at the point to start
sewing.
x Lower the foot while pushing the black button in.
The foot is locked in the horizontal position.
c The foot will be unlocked automatically after
sewing several stitches.
q Black button
Turning Square Corners
To maintain a 5/8” seam allowance after turning a
square corner, use the cornering guide lines on the
needle plate.
z Stop stitching when the front edge of the fabric
reaches the cornering guide lines.
q Cornering guide lines
x Press the Up/Down needle position button to lower
theneedle into the fabric.
w Up/Down needle position button
c Raise the presser foot and turn the fabric
counterclock-wise 90º.
e Presser foot
v Lower the presser foot and begin stitching in the
new direction.
w
q
e
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome DC2011 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome DC2011 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info