602049
39
Zoom out
Zoom in
Previous page
1/52
Next page
37
9
0
Auto
1
2 3
15
1
2
3
5
4
1
1
2 2
3
6
7
4
(1)
(2)
(1)
(2)
Blind Hem Stitch
Machine setting
Pattern #14, #15
Foot G: Blind hem foot
Thread tension Auto
Fold a hem with the wrong side up forming a
0.4-0.7 cm (3/16-5/16˝) allowance.
Wrong side of the fabric
0.4-0.7 cm (3/16-5/16˝)
Overcasting
(1) On heavy weight fabrics that ravel, the raw edge
should be overcast first.
(2) Fold the hem under the fabric as illustrated for fine or
medium fabrics.
Place the fabric so that the folded edge is next to the
guide on the foot. Lower the presser foot.
Adjust the needle drop position if necessary. Sew
guiding the folded edge along the guide on the foot.
Guide
Open the fabric after sewing is finished.
Right side of the fabric
NOTE: If the needle pierces too far left, the stitches will
show on the right side of fabric.
Adjusting the needle drop position
The needle drop position can be adjusted by pressing the
stitch width adjustment keys.
(1) Press the plus (+) key to move the needle drop
position to the left.
(2) Press the minus (–) key to move the needle drop
position to the right.
The LED display shows “ 0.6 ” that indicates a distance
between the guide and left needle drop position in milli-
meter.
NOTE: The needle drop position will move to the left or
right, but the stitch width is remained the same.
Guide
Left needle drop position
Right needle drop position
1
2
3
2
3
1
1
2
3
4
5
4
6
7
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome 6260 QC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome 6260 QC in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info