602049
38
Zoom out
Zoom in
Previous page
1/52
Next page
36
9
0
Auto
1
2 3
9
0
Auto
1
2 3
01
1
2
22
Rolled Hem
Machine setting
Pattern #01
Foot D: Rolled hem foot
Thread tension Auto
Trim off the corner of the fabric 0.5 cm (3/16˝) by
0.8 cm (5/16˝) to avoid a bulkiness of the hem at the
corner.
Fold the fabric edge twice 0.3 cm (1/8˝) wide and 6 cm
(2 3/8˝) long.
Wrong side of the fabric
0.5 cm
0.8 cm
Curl of the foot
Place the fabric aligning the hem edge with the guide
on the foot. Lower the foot and sew several stitches
while pulling both threads to the back.
Stop the machine with the needle in the fabric and
raise the presser foot. Insert the folded portion of the
fabric into the curl of the foot.
Lower the foot and sew while lifting up the fabric edge
to keep it feeding smoothly and evenly.
Eyelet
Machine setting
Pattern #22
Foot F: Satin stitch foot
Thread tension Auto
Depress the foot control and the machine will sew an
eyelet and stop automatically.
Open the eyelet with a small awl or punch.
If the eyelet opens or overlaps when sewing on certain
materials, correct it by pressing stitch length adjustment
keys as follows:
Press the minus (–) key if the eyelet is open (The LED
display shows “ L1 ”).
Press the plus (+) key if the eyelet overlaps (The LED
display shows “ L3 ”).
NOTE: The default setting is “ L2 ”.
1
2
1
2
3
4
2
3
1
2
3
1
4
1
2
3
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome 6260 QC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome 6260 QC in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info