Manual Janome 509 Sewist (page 50 of 71) (English, French, Spanish)

602079

Zoom out

Zoom in

1/71

Corded Buttonhole

Machine setting

q Stitch pattern:

w Stitch length: 0.5 – 1

e Thread tension: 1 – 5

r Presser foot: Sliding buttonhole J

z With the buttonhole foot raised, hook the filler cord on

the spur at the back of the foot.

Bring the ends toward you under the foot, clearing the

front end.

Hook the filler cord into the forks on the front of the

foot to hold them tight.

q Spur

w Forks

x Draw both of needle and bobbin thread to the left.

Move the slider toward you so that the top mark r

on the slider meets the start mark e.

e Start mark

r Top mark

t Needle thread

y Bobbin thread

Lower the needle into the fabric at the starting point

and lower the foot.

Depress the foot control gently and sew the

buttonhole over the cord.

The sewing sequence is the same as the 4-step

buttonhole.

c Pull the left end of the filler cord to tighten it and cut

the excess tails.

To cut the buttonhole opening, refer to the

instructions on page 44.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Janome 509 Sewist in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Janome 509 Sewist Manual

Product: