Manual Jablotron JA-60GSM (page 2 of 6) (English)

554884

Zoom out

Zoom in

1/6

User manual JA-60GSM - 2 - MFJ51808

1. User features of the GSM dialer

The JA60GSM dialer offers many useful features described in detail below. The installer should

properly demonstrate the use of the system to the user after installation and instruct the user on how to

set user access codes.

1.1. Phone calls from the attached SMS-8010 telephone set (optional accessories)

After the GSM module is connected to the GSM network, an attached phone can be used. If you

pick up the phone you will hear a dial tone. Simply dial the number you want to call. You can also dial

the GSM communicator’s phone number from another phone and the attached phone will ring as a

normal landline phone would. If it is necessary to communicate with CMS the call from the attached

phone will be terminated in 10 minutes. If a busy tone is generated while the attached phone is being

used, it indicates either the line you are calling is busy or that the GSM communicator is busy with a

communication (alarm system data transfer has priority).

1.2. Sending SMS messages

If used, then the SMS-8010 phone can be used for easy and convenient receiving and sending of

SMS messages. The main features of SMS-8010 are:

• Making calls – using the receiver or the build-in hands-free set

• Writing SMS messages using an alphabetical keypad, message archiving (40 messages)

• Call record function – caller identification and date/time

• Integrated phonebook records up to 80 phone numbers and names

For detailed information see the SMS-8010 manual.

1.3. Telephone remote control of the alarm system

A Jablotron system equipped with the GSM dialer can be remotely controlled via a landline or mobile

phone. From a mobile phone there are two possibilities – either by text instructions sent via SMS or by

dialing-in and operating the system via the phone keypad, which operates in the same way as the alarm

system keypad. The dialing-in method can also be preformed from an ordinary landline telephone.

The following description matches the factory default settings of the dialer. The described features can

be modified during the installation. The installer should explain clearly any changes to the default settings.

1.4. General instructions for the remote control via SMS instructions

 SMS instructions can be sent from a mobile phone or from Jablotron’s SMS website

(www.GSMlink.cz

 SMS messages are not case sensitive. Only Standard English letters are accepted.

 All SMS instruction words must be separated by a space.

 If the % is used all previous text will be ignored. The %% symbol when used in SMS text ends

processing – all the following text will be ignored. It is recommended to use this symbol at the end of

the instruction if the provider sends some additional text after your message (advertisements etc.).

 Warning: if any incoming SMS includes except a valid system command any extra text

which is not separated by % or %% symbols the command will not be executed

Examples of SMS: “Hi, this text will be ignored even if I write ME % MO %% Thank you” – Only MO

command will be executed

“Hi, MO” – Command in the SMS will be ignored because there is an extra text

 The default command texts can be customized by an installer or user (see section 3.3). E.g.

the command AUXON can be changed to SWITCH ON HEATING etc.

1.5. Arming by SMS (AM xxxx)

The command AM followed by a valid access code is used for arming the alarm system. If the

system is already fully armed, this command will be ignored.

Send SMS text to the dialer: AM∗xxxx

xxxx is a valid alarm system access code (Master or user).

∗ separator (asterisk or space)

Example: Sending of AM

∗

1234 will arm the system in the same way as if the code 1234 is entered on

system’s keypad.

User manual JA-60GSM - 11 - MFJ51808

5. Web server remote access

5.1. Setting possibilities:

The setting server allows a user to read and change the control panel and dialer configuration. Data

transfer is made by sending an SMS. The web site allows the user to change:

• control panel setting,

• dialer setting,

• set messages that will be transferred to up to 7 phone numbers,

The web site is able to read an event memory of a control panel as well (such as ComLink software). The

number of sent data SMS’s is optimized to reduce costs as much as possible.

5.2. Registration to the web site

Registration can be done in two ways:

• Web site www.gsmlink.cz – to register your system use the registration code printed on the

warranty certificate (the code has a form xxxxx-xxxxx-xxxx and it is unique for each system)

• Mobile phone – when the alarm system is in the programming mode, enter 972 xxxxx F0 on

the alarm system keypad (xxxxx is your mobile phone number). After a moment you will receive

an SMS with a registration code and the system will register to the web server.

5.3. Control panel or GSM dialer setting

If you want to set the control panel features you need to know your service and user code. After

receiving the correct SMS the GSM dialer will switch to the service mode (disarms and enters the

service mode), set the parameters, reads settings and switches back to the chosen mode (service,

armed or disarmed). Correct settings and state of the control panel is transferred back to the server.

5.4. Reading of history events

History events are readable in any state of the control panel (service code is not needed). One SMS

contains 20 events. If it is necessary to read all of the events the GSM dialer will send 7 SMS

messages.

6. The Modem function

The GSM communicator can also be used as an external modem for accessing the Internet (GPRS

format). It is necessary to have the GPRS in the SIM card activated and to have a connection cable

connected to the COM port of the PC. Support for MS Windows operating systems can be found on

the enclosed CD. The modem can be used only when all reports to the CMS, SMS and system’s calls

are executed.

When the modem is used:

 It is possible to use the attached telephone, the internet connection will be temporally suspended

 Received SMS’s are stored and they will be processed after disconnection of the modem

 The modem will be disconnected if an alarm or arming event occurs

7. Additional information

7.1. Events reporting priorities:

If the dialer is activated to send an events report it will:

 send information to CMS

 send SMS reports (1st telephone number, 2nd telephone number,…. 8th tel. number)

 send audible warnings (1st telephone number, 2nd telephone number,…. 8th tel. number) –

each number is called only once, no matter if it is answered or not

If any event is triggered which should be reported to a CMS while the alarm system is accessed remotely

from a phone, the report will be sent after the remote access is finished.

If the user cancels the alarm, all reports, which haven’t been sent yet, will be deleted. This doesn’t included

communication with the monitoring station.

Suddenly the system stopped and no communication with the main door panel Submitted on 24-9-2021 at 12:18
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron JA-60GSM in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jablotron JA-60GSM

Jablotron JA-60GSM Installation Guide - English - 11 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Jablotron JA-60GSM Manual

Product: