555054
12
Zoom out
Zoom in
Previous page
1/34
Next page
Alarm system JA-60 "COMFORT" - 12 - MDY51319
List of control panel programmable parameters
Function sequence options
factory
d.
note
Enrolling of detectors and controllers
1
1& 6 scrolling, hold 2 to erase
position, 3 all controllers, 4 to
erase all items
-
Exit delay
20x
x = 1 to 9 (x 10sec.)
30sec.
Entrance delay
21x
x = 1 to 9 (x 10sec.)
30sec.
Alarm duration
22x
x = 1 to 8 (min.), for x=0 it
will be 10 sec., for x=9 15min.
4min.
Function of PgX output
23x
x = 0 to 8 (0-Chime, 1-Fire,
2-Arm, 3-Panic, 4-Alarm,
5-Door, 6-Home, 7-NO AC,
8-Phone
Chime
Function of PgY output
24x
x = 0 to 8 (0-Chime, 1-Fire,
2-Arm, 3-Panic, 4-Alarm,
5-Door, 6-Home, 7-NO AC,
8-Phone
Arm
Voice message & phone numbers: editable in the
user mode
25x
251 = YES 250 = NO
NO
Radio signal jamming regular testing
26x
261 = YES 260 = NO
NO
Regular communication check enabled
27x
271 = YES 270 = NO
NO
RESET enabled
28x
281 = YES 280 = NO
YES
Control panel teaching to a UC-2xx, subsystem,...
299
will send enrolling signal
-
No code requested (effects F1, F2, F3, F4, F8 & F9)
30x
301 = YES 300 = NO
YES
Partial (Home) arming enabled (F2)
31x
311 = YES 310 = NO
YES
Siren alarm enabled
32x
321 = YES 320 = NO
YES
Exit delay audible indication enabled
33x
331 = YES 330 = NO
YES
Partial arming exit delay audible indication
34x
341 = YES 340 = NO
NO
Entrance delay audible indication enabled
35x
351 = YES 350 = NO
YES
Arming & disarming chirp sound enabled
36x
361 = YES 360 = NO
NO
Siren in Disarm & Partial arming enabled
37x
371 = YES 370 = NO
YES
Wireless siren alarm enabled
38x
381 = YES 380 = NO
YES
Indication of system problems when arming
39x
391 = YES 390 = NO
NO
Split control panel (A, B & C sections) 690x
6901 = YES 6900 = N0
NO
Addressing of wireless detectors to sections 61 nns
nn– zone n., s- section
1-10 A only when split
Addressing of user codes to sections 62 nns
nn– code n., s- section
all A
only when split
Addressing of wireless controllers to sections 63 nns
nn– controller n., s- section
all A only when split
Automatic arming/disarming setting
64nahhm
m
n- 0-9, a-action #, hh-hours,
mm-min.
all off
New Service Code setting
5 nSC nSC
nSC = new Service Code
(must be entered twice)
6060
User Mode entering
6999
Switching to the User mode
-
Real time and date setting
4 hh mm DD MM YY
00 00 01 01 00
8.1. Testing of the system when the LED display displays „P“
In the programming mode (indicated by a „P“) no alarm can be triggered. The control panel will confirm receiving any
signal from an enrolled detector or another JA-60 wireless item. It will make a beep - press F to select the loudness of the
beep (0-I-II) and the LED display will show which signal was received. Some detectors (JA-60P, JA-60N etc.) have an
extra testing mode, which is usually activated for 5 minutes after the detector’s cover is attached (see manuals of the
particular detectors).
Just as in the programming mode, the signals from all enrolled items are confirmed in the user mode (confirmed by a
“U”). The user mode is accessible with the Master code and the supervisor of the system can use this mode to replace
batteries in items or for system testing. To open the user mode enter F 0 MC (= Master Code) when the control panel is
disarmed.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron JA-60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron JA-60 in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jablotron JA-60

Jablotron JA-60 Additional guide - English - 1 pages

Jablotron JA-60 User Manual - English - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info