555054
6
Zoom out
Zoom in
Previous page
1/34
Next page
opening of door detector (bottom
view)
Open the detector’s cover by pressing the internal pawl – see fig. 7
Install the detector to the desired location using the two provided screws.
Be sure that the antenna is vertical (pointing up or down)
Attach the magnet, using the provided screws, to the moving part of the door or
window, and attach its cover. The gap between the detector and magnet should
not be wider than 5mm when the door is closed (see fig. 8)
Warning: neither the detector nor the magnet should be fixed directly to a metal
surface. If there is no other choice, an insulating pad (plastic, wood etc.) 5mm
thick or more should be used under the detector and the magnet.
Fig.7
Fig.8 – detector’s mount and
reaction setting
Use DIP switch no. 1 to select if the reaction of
the system to the door opening should be in-
stant or delayed (main entrance door). Switch
no. 2 must stay in the OFF position. See fig. 8.
check that all 3 terminals in the detector are
connected together with short connecting
loops.
install other JA-60N magnetic detectors the
same way.
Be sure to leave all JA-60N detectors un-
covered and without batteries installed.
3.2. JA-60P - motion detector installation
By using the provided bracket, the JA-60P detector can be installed on the wall or in a corner. The recommended installa-
tion height is from 2 to 2.5 meters above the floor. The detector’s coverage area is up to 12 meters and it has a detection
angle of 120° (see fig. 11). Do not place the detector close to any heating/cooling vents or near any other object that often
changes temperature. The JA-60P should not be placed near any item that generates a strong electromagnetic signal
(transmitters, electronic regulators etc.). Avoid locations that have intense air circulation.
Alarm system JA-60 "COMFORT" - 6 - MDY51319
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jablotron JA-60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jablotron JA-60 in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jablotron JA-60

Jablotron JA-60 Additional guide - English - 1 pages

Jablotron JA-60 User Manual - English - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info