Tools Required:• 5mm Allen wrench• 10mm Box wrench•
CX Bikes
1. Loosen the 4 Allen bolts that mount the motor bracket 1. from underneath the frame.
Adjust the motor chain tensioner bolt until there is only 2. about 10mm (3/8”) slack in the motor drive chain.
Retighten the 4 motor bracket Allen bolts.3.
Electric Bikes with Frame Mounted Cartridge
Battery Packs and Vertical Mounted Motors
(Motor is mounted on the vertical plane of the wheel axle)
Loosen (do not remove) the 5mm motor bracket 1. mounting bolt.
Loosen the 15mm outer axle nut.2. Loosen the 17mm inner axle nut.3. Loosen the 14mm top adjuster nut.4. Tighten or loosen the 13mm lower adjuster nut to adjust 5. the motor chain. (Note: Lowering the 2 nuts will loosen
the chain, raising them will tighten the chain)
Adjust the motor chain tension to allow only about 6. 5mm slack (3/16”).
Tighten the 14mm top adjuster nut against the lower 7. bracket tab and 13mm nut.
Tighten the 5mm motor bracket mounting bolt.8. Tighten the 17mm inner axle nut.9. Tighten the 15mm outer axle nut.10.
Chain Tensioner Bolt4 Motor Bracket Mounting Bolts
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Izip Enlightened Series at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Izip Enlightened Series in the language / languages: English as an attachment in your email.
The manual is 6.51 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
