803711

Izip Enlightened Series Manual

110
Zoom out
Zoom in
Previous page
1/140
Next page
110
Chain Rivet Tool
Adjustment and Replacement
On derailleur geared bicycles the rear derailleur automatically tensions
the chain. To adjust the chain on single speed freewheel, coaster hub
braked or 3-speed hub geared bicycles:
Loosen the rear axle nuts (and coaster brake arm clip if fitted) 1. and move the wheel forward to loosen, or backward to tighten, in
the frame.
When correctly adjusted, the chain should have approximately 2. 10mm (3/8") of vertical movement when checked in the center
between the chainwheel and rear sprocket. Center the wheel
in the frame and re-tighten the axle nuts after any adjustment.
Bicycles which have a single speed freewheel, coaster hub
brake or 3-speed hub, generally use a wider type chain than
derailleur geared bicycles. These chains can be disconnected by
way of a special U-shape joining link, that can be pried off of the
master link with a screwdriver. To replace, feed the chain around
the chainwheel and rear sprocket, fit the master link into the
rollers into each end of the chain, position the master link side
plate, and slip on the U-shaped snap-on plate. Make sure the
open end of the U-shaped plate is trailing as the link approaches
the chainwheel when pedaling forward.
Derailleur geared bicycles use narrower chains and require a
special tool to fit and remove chain links, or to change the length. To
remove, fit the rivet tool so that the punch pin is centered over any one
of the chain rivets. Push the rivet almost all the way out, then back out
the punch and remove the tool. Holding the chain on both sides of the
punched rivet, bend it slightly to release link from the rivet. To install,
feed chain around chainwheel, rear sprocket and derailleur cage with
rivet facing away from the bicycle. Bring the two ends together within
the special tool and punch the rivet into place. Be sure not to push rivet
too far through side plate.
… 110 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Izip Enlightened Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Izip Enlightened Series in the language / languages: English as an attachment in your email.

The manual is 6.51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info