Make sure the brakes are loose enough to allow the wheel to 1. pass through the brake pads easily.
Place wheel into fork drop outs.2. Install retaining washers with raised lip pointed towards the 3. fork, and insert into the small hole of the fork blade. NOTE:
Some bikes may have step retaining washers in place of the
retaining washer (shown in dotted box). If so, install the step
retaining washer, raised portion sliding in to the fork dropouts.
Install axle nut and tighten. Make sure the wheel is centered 4. between the fork blades.
Spin the wheel to make sure that it is centered and clears the 5. brake shoes. Tighten the brakes if necessary.
Turn the bicycle upright using the kickstand to support it.6.
Front Brake
Determine which type of brake your bike is equipped with and refer to
the appropriate assembly instructions. For more information on brake
adjustment and maintenance, refer to pages 99-102. A greater force
is required to activate the rear brake due to longer cable length. It is
advisable to mount the rear brake on the side of the stronger hand.
It is important to become familiar with the use of hand brakes. When
properly adjusted, hand brakes are an efficient braking system. Keep
the rim and brake shoes clean and free from wax, lubricants and dirt
at all times. Keep brakes properly adjusted and in good working
condition at all times.
Open the brake lever and place the nipple end of the short brake
cable into the lever, then close the lever. Secure the ferrule against
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Izip Enlightened Series at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Izip Enlightened Series in the language / languages: English as an attachment in your email.
The manual is 6.51 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
