Manual Izip Enlightened Series (page 73 of 140) (English)

803711

Zoom out

Zoom in

1/140

Seat

Loosen nut on the seat clamp and add 3 or 4 drops of oil onto the threads

of the bolt. Place the smaller end of the seat post into the seat clamp until

it stops with the bolt to the rear of the seat post. Thread the nut on the seat

clamp loosely. Insert the larger end of the seat post into the seat tube of

the bicycle frame observing the minimum insertion mark on the seat post.

Position the top surface of the seat parallel with the ground. The serrations on

the seat clamp must mesh completely with the seat frame serrations, push the

front of the seat up and down to align the serrations. Securely tighten the seat

clamp. Securely tighten the bolts on the seat post clamp.

The seat post must be inserted so that the minimum

insertion mark cannot be seen.

Attachment of an incorrect pedal into a crank arm will

cause irreparable damage to the crank, the pedal or both.

Pedals & Crank Set

Look for the letters “R” for right, and “L” for left, stamped on each pedal spindle.

Start each pedal spindle by hand to avoid stripping the threads. Tighten with a

15mm narrow open ended wrench. Note that the right hand pedal attaches to the

chainwheel side crank arm with a right-hand (clockwise) thread. The left pedal

attaches to the other crank arm and has a left-hand (counter-clockwise) thread. It

is very important that you check the crank set for correct adjustment and tightness

before riding your bicycle. New cranks may become loose with initial use, refer

to pages 103-106 for proper crank set adjustment and maintenance. Once the

pedals have been attached, check that the crank arm rotates smoothly and that

there is no lateral movement.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Izip Enlightened Series in the language / languages: English as an attachment in your email.

The manual is 6.51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Izip Enlightened Series Manual

Product: