Manual Iseki TXG237 (page 95 of 98) (English)

658894

Zoom out

Zoom in

1/98

TXG237

PRE-DELIVERY

・

Check that engine oil level is correct.

・

Check that coolant level is correct.

・

Check fan belt tension, 10mm deflection, when sub-

jected to a force of thumb pressure.

・

Check that transmission oil level is correct.

・

Install a sufficient amount of No. 2 diesel fuel to

complete pre-delivery service.

・

Ensure clean and tight cable connections at battery.

Battery must be securely mounted.

・

Check air cleaner, element, hoses and clamps for

correct installation.

・

Check brake and clutch pedal linkage for correct

freetravel.

・

Check steering, brake and clutch linkage cotter pins

and lock nuts for secure installation.

・

Check filter element and, all connections and

clamps for hydraulic pump and filter.

・

Check oil level in front drive axle. Place fuel filter

shutoff valve in the “ON” position. Take up position

in operator’s seat and engage parking brake.

・

Place all shift levers in neutral and then depress

clutch pedal.

・

Place rear PTO and mid PTO selector levers in

neutral.

NOTE: Engine will not start unless range shift lever

is selected to neutral, rear PTO, and mid

PTO selector levers are in neutral.

・

Set throttle lever at half to full throttle and turn main

switch counterclockwise 5-10s.

・

Turn main switch clockwise to “ON.” Oil pressure

and alternator warning lights will illuminate. Hold in

“on” position 1-2s.

・

Turn main switch to “Start” to crank the engine.

Release key to “ON” position the moment engine

starts. Check that warning lights go out.

・

Allow engine to warm up to operating temperature

at about 1500rpm.

・

Operate Tractor to confirm it operates smoothly at all

speeds including four-wheel drive (if it is equipped).

・

Operate PTO to see that it functions properly.

・

Check that all lights and instruments operate properly.

・

Check brakes for balanced operation.

・

Check warm engine low idle speed, 1250-1300 rpm.

・

Check warm engine high idle speed, 2760-2860 rpm.

・

Set throttle lever at idle, shut off engine and check

Tractor for coolant, lubricating oil or fuel leaks.

・

Check that safety start system functions correctly.

・

Lubricate all fittings.

・

Check tire inflation pressures.

・

Check front wheel toe-in.

・

Test anti-freeze to see that it is adequate for local

climate conditions.

NOTE: Factory fill is set to -34°C.

・

Check to see that all safety decals and safety

switches are in place.

・

Clean and polish sheet metal as necessary.

・

Fill fuel tank to prevent moisture accumulation.

・

Review this Operator’s Manual with the customer

when delivering or demonstrating Tractor.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Iseki TXG237 in the language / languages: English as an attachment in your email.

The manual is 10,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Iseki TXG237 Manual

Product: