658894
94
Zoom out
Zoom in
Previous page
1/98
Next page
ASSEMBLY & PRE-DELIVERY INSPECTION
93
ASSEMBLY
IMPORTANT: Do not commence assembly of this Tractor until reading these instructions completely and carefully.
NOTE: For certain lubrication, adjustments, etc., refer to appropriate section of this booklet. All nuts, bolts, etc.,
on these Tractors are in METRIC dimensions.
Tractor is shipped in individual container. The Tractor will be partially disassembled to make container as com-
pact as possible. Wheels, fenders, ROPS, steering wheel, lift linkage, drawbar, and some attaching hardware will
be removed.
Larger items will be fastened in container and remainder of items will be shipped in sundry boxes also
in container.
Certain areas of Tractor may be covered with thin film of protective wax. It may be removed by steam cleaner
and detergent solution during assembly.
Tractors will arrive with battery installed.
To assemble and pre-deliver the Tractor, proceed as follows:
CAUTION: Be observant of components (wheels, fenders, ROPS, etc.) that may be attached to,
or held in position by container panels.
ASSEMBLY & PRE-DELIVERY INSPECTION
1. Remove ROPS frame, steering wheel, seat, and
sundry boxes from container.
2. Disassemble container.
3. Inspect Tractor for damage and any evidence of
coolant, fuel or lubricant leaks.
FIG. 8-1:
4. Installation of lower links, lift rod and top link. Open
sundry boxes, install lower link with shaft, 1, and
install retainer plates, 2, on outside with bolts, 3 on
right side. Install lift rod, 4, and top link, 5.
5. Wheel assembly (separate with container)
Front
Install the front wheel with 4 bolts (M14).
Tightening torque is 100 to 115 ft. lbs. (137 to 156Nm)
Rear
Install the front wheel with 5 bolts (M12).
Tightening torque is 65 to 75 ft. lbs. (87 to 102 Nm)
FIG. 8-1
94


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Iseki TXG237 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Iseki TXG237 in the language / languages: English as an attachment in your email.

The manual is 10,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info