658894
67
Zoom out
Zoom in
Previous page
1/98
Next page
TXG237
66
FIG. 5-29
FIG. 5-30
FIG. 5-31
Air-Bleeding Fuel System
If any of the following conditions have occurred, the
system should be bled:
Fuel tank has been permitted to run dry.
Fuel lines, filter element(s) and other components
within system have been disconnected or removed.
Engine has not been operated for a considerable
periood of time.
Engine fails to start, or starts but stops again after a
few minutes of operation.
FIGS. 5-29 & 5-30: Fuel system components:
Description Location
(1) Fuel tank seat,under
(2) Filter valve on filter
To bleed air from the fuel system:
Fill fuel tank, 1, until full.
Turn fuel filter valve, 2, to “OPEN” (or ON) position.
Loosen filter air-bleeding screw, 3, and let air
bubbles out.
Loosen air bleeding screw, 4, for fuel injection pump
and let air bubbles out of the pump
NOTE: Normally, further air-bleeding is not required
due to electric fuel pump operating when
main switch in, instrument panel is ON.
If engine will not start after several attempts,
check fuel pump fuses (see Electrical System ).
Fuel Tank Filler Cap
When fuel tank filler cap is removed, a hissing or pop-
ping noise may be noticed. This is due to cap design
and is a normal condition. Do not alter cap or use
unapproved replacement as fuel leakage may occur in
event of Tractor upset.
Throttle Lever
FIG. 5-31: Hand throttle lever should remain in posi-
tion selected by operator. Through normal use, friction
against lever may decrease, causing lever to move
out of selected position. Turn adjusting nut, 1, as re-
quired to retain throttle lever in position selected.
NOTE: Throttle lever friction adjustment is reached
by removing the steering column cover, and
instrument panel.
1
2
Close
Close
Open
Open
2
3
4
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Iseki TXG237 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Iseki TXG237 in the language / languages: English as an attachment in your email.

The manual is 10,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info