658894
66
Zoom out
Zoom in
Previous page
1/98
Next page
MAINTENANCE & ADJUSTMENT
65
FIG. 5-27
FIG. 5-28
FUEL SYSTEM
Use only clean diesel fuel of correct grade. Introduc-
tion of water or dirt into fuel tank or other portion of
fuel system can cause repeated plugging of fuel filter
and possible injection pump and injector damage.
IMPORTANT: Do not tamper with injection pump or
injector adjustments as doing so may
render engine and / or Tractor warran-
ty void and may cause severe engine
damage. Consult your ISEKI Dealer.
Fuel Filter
FIG. 5-27: Fuel filter assembly, 1, is located at left
side of frame LH and is used to strain impurities from
fuel before fuel reaches injection pump. Fuel filter
incorporates valve, 2 to aid in filter servicing and air-
bleeding of fuel system.
Check filter bowl for accumulation of sediment or wa-
ter and clean as required.
FIG. 5-28: To replace fuel filter element or clean sedi-
ment bowl, turn fuel valve to OFF position (handle to
rear).
Carefully loosen spanner nut, 1, and remove nut, sedi-
ment bowl, 2, and “O” -ring, 3. Sediment bowl can be
cleaned at this time.
NOTE: Do not lose spring, 4, between bowl and filter
element.
Pull downward on filter element, 5, and discard. Ex-
amine small “O”-ring, 6, in filter head and replace as
necessary. Install new element, pushing upward until
seated.
Install sediment bowl with spring, “O”-ring, and nut.
Tighten nut and wipe up spilled fuel. Proceed to “Air-
bleeding Fuel System” on following page.
5
6
2
4
1
3
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Iseki TXG237 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Iseki TXG237 in the language / languages: English as an attachment in your email.

The manual is 10,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info