658894
62
Zoom out
Zoom in
Previous page
1/98
Next page
MAINTENANCE & ADJUSTMENT
61
FIG. 5-20
Front Axle Oil
The front drive axle has a common oil level for the
front differential housing and each wheel reduction
unit. The oil level shouId be checked every 50h of trac-
tor opeation. The oil should be changed after first 50h
of operation and every 300h of operation thereafter.
Check Oil Level
FIG. 5-20: Park the tractor on level ground and shut
off the engine. Remove oil filler, 1, on the top of the
left-hand front axle. Remove plug, 3, on the top of
final cause on both side to let the air inside the front
axle go out. Check that the oil level is half of front axle
houslng. When the oil level is lower, add oil until half
level of front axle.
NOTE: When the oil level is hard to be checked,
insert a ruler to see the height to the oil level.
Change Oil
Place a tray under the drain plug, 2. Remove the drain
plug and let all oil drain out from both wheel reduction
units. Wrap the threads of the drain plug with sealing
tape and screw it back in securely. Remove plug, 3,
on the top of final case on both side to let the air in-
side the front axle go out. Pour fresh gear oil through
the oil filler, 1.
1
3
2
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Iseki TXG237 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Iseki TXG237 in the language / languages: English as an attachment in your email.

The manual is 10,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info