579040
9
Zoom out
Zoom in
Previous page
1/34
Next page
9
Starting up the Main Console Unit
Once the console unit is properly powered, the display will start showing some data and
weatherparameters.Waitforafewminutesfortheconsoletonishself-calibrationandfor
the sensor readings to show up.
If “---” is still displayed for the sensor reading(s), check the wireless transmission path and
the batteries for the corresponding sensor.
5. Using your Weather Station
Setting up the Main Console Unit
1. Open the latch at the back of the main console unit.
2. Insert 4 x UM-3 or “AA” size 1.5V batteries according to the polarities shown.
3. Reattach the latch.
4. You are highly recommended to connect the AC/DC adaptor. For the feathure of the
automatic backlight control function, the AC/DC adaptor must be used.
5. If placing the console unit on a table or horizontal surface, fold out the table stand and
adjust to the optimal viewing angle.
6. If mounting the console unit on a wall or vertical surface, fold the table stand back into
theunitandusethettingprovided.
Placement tips:
Make sure that the console unit is within receiving range of all remote sensors. Ideally
sensors should be within the line of sight of the console unit. Transmission range may be
affected by trees, metal structures and electronic appliances. Test reception before perma-
nently mounting your weather station.
The console unit measures indoor temperature, humidity, pressure and receives signals
from all remote sensors and radio-clock broadcasts. Avoid placing the console unit in the
following areas:
- Direct sunlight and surfaces which radiate and emit heat.
- Near heating and ventilation devices, such as heating ducts or air conditioners.
- Areas with interference from wireless devices (such as cordless phones, radio headsets,
baby listening devices) and electronic appliances.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Irox PRO-EC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Irox PRO-EC in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Irox PRO-EC

Irox PRO-EC User Manual - German - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info