579040

Irox PRO-EC Manual

8
Zoom out
Zoom in
Previous page
1/34
Next page
8
Setting up the Anemometer (wind sensor)
1. Assemble the wind cups and wind vane to the anemometer arm (note: the small hex screw
is preinstalled and can be operated by the small hex key included in the accessories)
2. Attach the assembled anemometer to the base.
3. Insert two 2 x UM-3 or “AA” size 1.5V batteries into the battery holder in the base.
4. Mounttheanemometerontoaverticalsurface,usingthettingsprovided.
5. Toallowthemainconsoleunittondthedirectionwhichthewindvaneisoriented,the
following procedures are required:
i. Insert the batteries
ii. Point the wind vane towards the north. Use a compass or map if necessary.
iii. Use a pin to press the “SET” key which is in the battery compartment of the wind sensor.
Note: Above procedure must be repeated for changing battery.
The “SET” will toggle the direction between two modes:
1. Let the wind direction as manufacturer design. It will be as a default setting after
2. Set the current direction as NORTH.
Placement tips:
- Check that wind can travel freely around the anemometer and is not distorted by nearby
buildings, trees or other structures.
- For better results, place the anemometer at least 3m above local structures and obstacles.
Thegroundcreatesafrictionaleffecttowindowandwillattenuatereadings.
- Aim for maximum exposure of the anemometer to the commonest wind directions in your
area.
-Theofcialmountinglocationforanemometersis10m(33ft)abovegroundlevelinaclear
unobstructed location.
Placement tips:
- The rain sensor should be placed in an open area away from walls,fences, trees and
othercoveringswhichmayeitherreducetheamountofrainfallintothesensor,deectthe
entry of wind-blown rain, or create extra precipitation runoff. Trees and rooftops may also
be sources of pollen and debris.
- To avoid rain shadow effects, place the sensor at a horizontal distance corresponding to
two to four times the height of any nearby obstruction.
-Itisimportantthatrainexcesscanowfreelyawayfromthesensor.Makesurethatwater
does not collect at the base of the unit.
- The rainfall measurement mechanism utilizes a magnet, hence do not place any magnetic
objects around the proximity of the sensor.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Irox PRO-EC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Irox PRO-EC in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Irox PRO-EC

Irox PRO-EC User Manual - German - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info