578907

Irox Aqua Manual

30
Zoom out
Zoom in
Previous page
1/32
Next page
~P.30~
the first 24 hours of operation.
2. In periods of long stable weather conditions, it becomes difficult to make a reliable
forecast.
3. The weather forecast is solely calculated on the basis of barometric air pressure
changes.
4. The probability of a correct weather forecast is approximately 70% and is valid for
an area of approx. 20-30 km around the location of the weather station.
5. The forecast “Sunny” means at night “cloudless weather”. Fog is not indicated by the
weather station as this can occur with different weather conditions.
6. If you travel with the weather station, a reliable weather forecast will become
impossible due to changes in altitude and location. You’ll have to wait up to 24 hours
so that the weather station can calculate a new forecast based on the conditions at
the new location.
HOW TO CHECK THE BAROMETRIC PRESSURE
The current and historical barometric pressure is shown on the atmospheric pressure window.
For monitoring the Sea Level barometric pressure reading at certain altitude, the user needs to select
the local altitude (-100 to 2500 meter or -330 to 8250 foot) for the altitude setting. Our weather
station requires entry of elevation in meter and in foot separately.
1. To enter the altitude compensation setting mode, press and hold [HISTORY] button for 2 seconds
to switch from Barometric Pressure to Altitude adjust mode for 10 seconds and the meter icon
flashes.
2. During Altitude adjust mode, press [UNIT] button to toggle between meter and foot unit. Then
press [HISTORY] button to confirm.
3. Last altitude reading will flash, press [UNIT] button to increase the value by 10. Hold down the
button to have fast stepping. Press [HISTORY] button once to confirm and exit setting.
The atmospheric pressure can be displayed in mb/hPa, inHg. Press [UNIT] to select the pressure unit.
Our weather station is equipped with barometer reading for 24hr history. If you want to check the
pressure history for a particular hour during the past 24 hours, press [HISTORY] button, each press
on the button will go back by an hour.
Note: If the weather station was just installed with batteries and past data was not
yet measured, it will display “---”.
The recorded barometric changes for the past 24 hours are displayed in a bar chart below the
barometric pressure window.
SET BACKLIGHT COLOR
Press & hold [ MODE ] for 2 seconds to enter the backlight color setting and the barometric chart
displays a “C” pattern to prompt the user to set the color, the alternate backlight indicates the
backlight is set to auto mode and its color is changed according to the weather condition (see more
details in ‘BACKLIGHT COLOR CHANGE ACCORDING TO FORECAST WEATHER CONDITION’), press
[UNIT] button to select fix backlight color in the sequence, ‘WHITE’ -> ‘LIGHT BLUE’ -> ‘DARK BLUE’
and then cycle back to “auto mode”. Press [MODE] button to confirm the setting or auto exit after 10
second.
(ENG)
… 30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Irox Aqua at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Irox Aqua in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info