578907

Irox Aqua Manual

28
Zoom out
Zoom in
Previous page
1/32
Next page
~P.28~
2. In a second step, insert the x2 AAA batteries for the sensor unit. The LED on the front panel will
start flashing at a rate of one time per around 2 seconds indicates channel-1 is in use.
3. While the LED is flashing, press once the [CH] key will change the sensor channel setting to 2. Keep
toggle on [CH] key can change channel setting up to 5. The LED is blinking at a frequency to
indicate the channel setting. i.e. continuous blinks 2 times indicate channel-2 is selected.
Note: If user does not press any key for 10 seconds, it will exit the channel setting
mode and transmit the RF signal. The main unit will register the temperature
reading.
(If the transmitter has the LCD display, the °C/°F key will toggle the temperature unit on the LCD.)
REMOTE CHANNEL AUTO-SCROLLING
This device is equipped with an auto-scroll function. While the auto-scroll function is set, the unit will
automatically cycle to display the temperature and humidity of each remote sensor for 6 seconds.
1. To retrieve manually the specific sensor temperature and humidity reading, press CHANNEL key
until desired channel number is displayed.
2. To enable auto-scroll function, use CHANNEL button to select channel 1, 2, ... until auto scroll icon
appears on the left hand corner of the 3rd line display.
DCF 77 RADIO CONTROLLED CLOCK
The built-in radio controlled clock is designed to synchronize the time automatically once the unit is
brought within the range of the Frankfurt DCF 77 radio signal. When the unit is receiving the signal,
the radio reception “ ” icon will start flashing and during this reception all manual settings are
disabled.
The time reception may take, depending on the signal strength, up to 10 minutes.
When the time reception is complete, the “ ” icon will stop blinking and the following result is shown:
“ ” : Last reception was successful
“ ” : Last reception was not successful
You may start a new reception manually. To enable this feature, press & hold the [ ] button for 3-5
seconds. The radio reception signal “ ” icon will start flashing.
If you wish to disable the time reception while it is active in order to perform an operation on the unit,
press the [ ] button. The radio signal “ ” icon will stop blinking and the tower will be shown without
waves.
Note:
The radio controlled clock will start to receive the time automatically in the early
morning hours.
SET THE CLOCK, CALENDAR & LANGUAGE
1. Press & hold [CLOCK] button for 2 seconds to enter clock setting mode. Flashing 24 hours will appear.
2. Press [ ] or [ ] button to switch between 24 hours and 12 hours format, and then press [CLOCK]
button to confirm.
3. The hour digits will flash. Use the [ ] button to increase by one hour or [ ] button to decease by
one hour to your desired hours. Holding down either button will change the increment unit rapidly.
Press [CLOCK] button to confirm.
4. The minute digits will flash. Use the [ ] button or [ ] button to set your desired minutes. Holding
down either button will change the increment unit rapidly. Press [CLOCK] button to confirm.
Note: Every change of minute digit will automatically reset the seconds to zero.
5. The year digit will flash and Yr icon appears. Press [ ] or [ ] button to set your desired year.
Press [CLOCK] button to confirm.
Note: Year range is from 2000 to 2099.
6. D and M icons will flash. Press [ ] or [ ] to select D M (Date Month) or M D (Month Date) format.
Press [CLOCK] button to confirm.
(ENG)
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Irox Aqua at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Irox Aqua in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info