632878
30
Zoom out
Zoom in
Previous page
1/36
Next page
30 Roomba 800 Series Owner’s Manual
EN
Troubleshooting
Roomba will tell you something is wrong with a two-tone “uh-oh” sound followed by
a narrated voice. The troubleshooting light will also blink. Refer to the chart below to
resolve Roomba’s problem. If the problem is not resolved, visit www.irobot.com/support.
Runtime Errors
Roomba blinks
and says …
Likely cause What to do
Error 1.
Move Roomba to a
new location, then
press CLEAN
to restart.
Roomba is
stuck with a
wheel hanging
down.
Ensure Roomba’s wheels are firmly on the floor. If
Roomba is stuck, start in a new location. If Roomba
is not stuck, clean its side wheels of hair and debris.
Push the wheels in and out, and check that they
both turn freely.
Error 2.
Open Roomba’s
extractor frame
and clean
extractors.
Roomba’s
main extractors
can’t turn.
Remove and clean Roomba’s extractors and caps.
Clean Roomba’s side wheels of hair and debris.
Error 5.
Spin Roomba’s
side wheels
to clean.
Roomba's side
wheel is stuck.
Clean Roomba’s side wheels of hair and debris. Push
the wheels in and out, and check that they both turn
freely. Start Roomba in a new location.
Error 6.
Move Roomba to a
new location, then
press CLEAN
to restart.
Roomba’s cliff
sensors are
dirty, it is hang-
ing over a drop,
or it is stuck on
a dark surface.
If Roomba is stuck, start in a new location. If Room-
ba is not stuck, wipe its cliff sensors with a dry cloth.
Start in a new location.
Error 7.
Spin Roomba’s
side wheels to
clean.
Roomba’s side
wheel is stuck.
Clean Roomba’s side wheels of hair and debris. Push
the wheels in and out, and check that they both turn
freely. Start Roomba in a new location.
Error 8. Roomba’s fan
is stuck.
Remove and empty Roomba’s bin. Then, briskly tap the
bin to loosen any remaining trapped debris.
Error 9.
Tap Roomba’s
bumper to clean.
Roomba’s
bumper is
stuck, or the
bumper sensor
is dirty.
Briskly tap Roomba’s bumper several times to dis-
lodge any debris that may be trapped underneath.
To repeat Roomba’s error message, press CLEAN.
30


Need help? Post your question in this forum.

Forumrules
1

Forum

irobot-roomba-866

Reset search

  • My Roomba 866 stops and error2, “clean the brushes” is ordered. I have cleaned all the brushes and done the cleaning according to the manual for error 2. Still it stops and the same signal comes up. Submitted on 7-10-2021 at 13:46

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Irobot Roomba 866 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Irobot Roomba 866 in the language / languages: English as an attachment in your email.

The manual is 3,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Irobot Roomba 866

Irobot Roomba 866 User Manual - German - 40 pages

Irobot Roomba 866 User Manual - Dutch - 40 pages

Irobot Roomba 866 User Manual - French - 40 pages

Irobot Roomba 866 User Manual - Italian - 15 pages

Irobot Roomba 866 User Manual - Spanish - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info