632878
29
Zoom out
Zoom in
Previous page
1/36
Next page
Roomba 800 Series Owner’s Manual 29
EN
Clean Roomba’s sensors.
Wipe the following items with a clean,
dry cloth every week:
1. Four front cliff sensors
2. Two rear cliff sensors
3. Two Home Base contact points
4. Two robot contact points
5. Two bin sensors
6. Two inner bin sensor ports
7. Two outer bin sensor ports
Clean spinning side brush.
Use a coin or small screwdriver to remove the screw.
Then, remove the brush, clean it and reinstall it.
Regular Maintenance
When maintaining Roomba, look for the yellow parts. These parts are designed
to be removed and cleaned every time you empty Roomba’s bin.
Wheel
Axle
Wear guard
Housing
SCALE 0.400
Cliff Sensors
Bin Sensors
Clean Roomba’s front wheel.
1. Pull firmly on Roomba’s front wheel to remove it
from the robot.
2. Remove debris from inside the front wheel cavity.
3. Remove the front wheel from its housing by
pushing it through from underneath. Clear
any hair wrapped around the wear guards.
4. If the wheel rotation is still restricted, grab the
wheel with one hand by placing your finger
over one of the wear guards. Then, use your
other hand to pull on the other wear guard to
remove the axle from the wheel.
5. Clear away any hair and debris from the axle
and wheel assembly.
6. Reinstall the wear guards and shaft assembly
to the wheel, and the wheel to the housing.
Front wheels clogged with hair and debris
could result in floor damage.
Cliff Sensors
Robot contact
points
29


Need help? Post your question in this forum.

Forumrules
1

Forum

irobot-roomba-866

Reset search

  • My Roomba 866 stops and error2, “clean the brushes” is ordered. I have cleaned all the brushes and done the cleaning according to the manual for error 2. Still it stops and the same signal comes up. Submitted on 7-10-2021 at 13:46

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Irobot Roomba 866 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Irobot Roomba 866 in the language / languages: English as an attachment in your email.

The manual is 3,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Irobot Roomba 866

Irobot Roomba 866 User Manual - German - 40 pages

Irobot Roomba 866 User Manual - Dutch - 40 pages

Irobot Roomba 866 User Manual - French - 40 pages

Irobot Roomba 866 User Manual - Italian - 15 pages

Irobot Roomba 866 User Manual - Spanish - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info