738846
4
Zoom out
Zoom in
Previous page
1/12
Next page
Residential Installation
Page 4
ID-2225 System ID-2530 System
inch
mm
25.25 x 21.25 x 21.25
642 x 540 x 540
29.25 x 25.25 x 21.25
743 x 642 x 540
Weight 59 lbs. (27 kg) 74 lbs. (33.5 kg)
O
rder No.
2
07 80 21 02
2
07 80 21 04
Dimension L x W x H
ID-2225 Replacement Filter Set ID-2530 Replacement Filter Set
SIZE 3 SIZE 4
Order No. 202 11 30 02 (Filter Set, 4 count) 202 11 30 03 (Filter Set, 4 count)
Residential Installation
The Perfect 16 ID-Series can be suspended from exposed ceiling joists or the ceiling surface. Alternatively, it can be floor-
mounted (see page 5 for installation options).
1. Choose a location between the main return duct and the furnace, which is readily accessible for checking and replacing
the filter. Allow at least 24.5 in. (622 mm) clearance in front of the ID-2225 and 28.5 in. (724 mm) clearance in front of the
ID-2530.
2. Adapt connection panel for duct air handler connection as necessary (see page 4). Best performance is achieved with
the 16”x 20” opening for the ID-2225 model, and the 20” x 25” opening for the ID-2530. If flex duct is used, it is strongly
recommended to use 18” round dove tail collar for the ID-2225 and 20” for the ID-2530 for best performance.
3. Determine the correct air inlet and air outlet side of the system. The air inlet is marked with “Cut this Panel for Duct
Connection - DIRTY AIR IN”. The air outlet is marked with “Cut this Panel for Duct Connection - CLEAN AIR OUT.
Both panels will need to be cut for the proper fit of the ducting prior to installation.
4. If the Perfect 16 system is to be located immediately alongside the furnace, remove filters and secure cabinet via panel
from inside to the furnace with sheet metal screws. Ensure correct airflow direction when reinserting filters.
5. In basement installations, sheet metal turning vanes may be necessary to improve air movement through an elbow in
the duct.
6. Use foil tape to seal all duct joints. Note: All leaks on the return side of the system will cause dirty air to leak into the
return air stream. Leakage also occurs in many furnaces via the blower door. The blower door should also be sealed
with foil tape for the best air cleaning results.
7. Fill out the filter replacement label with the date of the next scheduled filter replacement, which should be no later than 3
years from the current date (based on 50% usage).
8. Check and inspect system for leakage.
9. Test for efficiency with a ParticleScan.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for IQAir Perfect 16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of IQAir Perfect 16 in the language / languages: English as an attachment in your email.

The manual is 1,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info