462566

IPSO HF 176 Manual

13
Zoom out
Zoom in
Previous page
1/22
Next page
13
4
Function F1 (Time stop)
During the wash cycle:
The wash time is stopped. The temperature, water level and wash action remain
the same as programmed.
During the wash cycle, this function remains active until the START button (S)
is pressed again.
During intermediate spin :
The intermediate spin normally lasts 1 minute.
By activating function F1, the machine will spin for nine minutes unless the
START button (S) is pressed earlier.
During final spin :
At final spin, you have high spin after low spin.
By activating F1 during low spin, this low spin will be extended to15 minutes
unless the START button (S) is pressed earlier.
If the 15 minutes of low spin have been completed, the high spin is automatically
canceled.
By activating F1 after the preprogrammed low spin, you will have a maximum of
14 minutes of high spin unless the START button (S) is pressed earlier.
Adjustable stop time :
Here you can program a certain stop time. The display shows the countdown
of this extra time. When this time is expired, the function will appear automatically
and the program will continue.
Select F1 (see above).
The stop time can be programmed by means of the ECO button (E). By pressing
it once, the stop time is programmed for 10 minutes. From now onwards, “F1”
and “10” appear by turns on the middle display.
By pressing the ECO button (E) once more, you add each time 10 minutes.
After 50 minutes, 1.0, 1.1, 1.2, etc... appear with a maximum of 4.0 hours.
By means of the START button (S), you can each time reduce 10 minutes.
Description of the
functions
Remark :
The programmed stop time is executed after the decimal point in the right
display has extinguished.
The stop time cannot be programmed during spin.
Function F2 (soak)
This function can only be chosen during prewash, main wash and first rinse.
The cycle time is stopped. The bath is filled till high water level and heated up
to 40 °C (if a higher temperature was programmed, this will be followed).
As long as this temperature is not reached, the machine makes a reduced wash
action ( shorter action time and longer pause time). When the bath has reached
its temperature, the drum will make one left/right rotation every 4 minutes. Should
the temperature fall, the water will be heated again, during which the action will
be reduced again.
This function remains active until the START button (S) is pressed again.
Programmable soak time :
In the same way as for the stop time, you can program the soak time (see
programmable stop time).
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for IPSO HF 176 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of IPSO HF 176 in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info