611564

Iomega StorCenter Pro NAS 150d Server Manual

52
Zoom out
Zoom in
Previous page
1/70
Next page
Troubleshooting
If you encounter a problem while connecting or using your Iomega StorCenter Pro Server,
check the topics listed below for possible solutions.
Click on any of the following topics to expand or close the troubleshooting information.
Drive does not power on
Make sure you are using the power cable that came with your drive. Ensure that it is
correctly connected.
1. Verify that the power cable is connected to the drive.
2. Verify that the power cable is plugged into a working power outlet.
3. Make sure the voltage on the AC selector swtich on the back of the StorCenter
Pro Server matches the power requirements for your country.
Make sure the status light is on. If it is not, press and release the power button. When
the status light is green, the drive is ready to use.
For more information, see Initial Setup.
| top of page |
Drive is not recognized on your system
Make sure the drive is powered on. See Connecting the Iomega StorCenter Pro Server.
Make sure you are using a functional Ethernet cable. We suggest using the Ethernet
cable that shipped with your drive. Verify that the link LED on the back of the drive is
on.
Make sure the Ethernet cable is connected to a 10/100/1000Base-T switch, hub, or
router or directly to your computer.
Check all connections (power and network).
Wait several minutes and then re-run Iomega Discovery Tool.
Try rebooting your computer and re-running Iomega Discovery Tool.
| top of page |
When I access Device Settings I am prompted for a password
Your drive is shipped from the factory with no password set. To login, simply leave the
password field blank and click the Login button.
You can change the password at any time via the Device Settings.
If you have lost or forgotten your password, reset the drive to the factory defaults by
holding the power button down until the status light flashes red. Once the status light
… 52 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Iomega StorCenter Pro NAS 150d Server at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Iomega StorCenter Pro NAS 150d Server in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info