459176

Inverto IDL5550S Manual

12
Zoom out
Zoom in
Previous page
1/124
Next page
En
9
(Now/Next EPG). The duration that this message is displayed
can be set, from 1 to 9 seconds.
Soundtrack
Some programmes are broadcasted in different languages. If
a multi-lingual programme is broadcast, then it is automatically
set to the language of your preference.
Primary Subtitle Language
Some programmes are broadcast with different subtitles.
If multi-subtitle programmes are broadcast, then it is
automatically set to the language of your preference.
History depth
You can set the history of previously selected programmes
from 1-5, and then use the “Last” key on the remote control to
switch between them.
Quick Save List
You can use this option to specify into which favourite list your favourites will be automatically saved. You may
select from the list of existing favourite lists or choose “Select FAV from list” to allow you to choose the location
later, while adding favourites.
OSD colour
You can change the colour of the user interface with this option.
EPG font size
This option allows you to change the size of the text in the EPG, to allow you to see more or less data at once.
Power Up Mode
This option allows you to set the unit to automatically change to a specic mode during power-up. If you select
“Stand-by mode”, the receiver will go into stand-by immediately after power-up. If you select “Last mode”, the
receiver will change to the same mode it was in, prior to switching it off.
Note: The receiver is able to switch on some TV sets that use the “Slow Blanking” signal on the SCART
connector. If “Last Mode” is selected, the receiver and TV will power-up at the same time.
Auto Upgrades
By choosing “Notify”, you will see a
symbol in the upper part of the OSD when a new update is available.
By choosing “Auto” your receiver will be automatically updated while in stand by.
ANTENNA SETTINGS
To set up the receiver for the type of antenna connected, follow
the instructions below.
Signal strength and signal quality bars
In two level bar meters, on the right side of the screen, the
user can see the strength and quality of the signal coming from
the antenna dish to the tuners. These two meters can be used
while doing a ne-tuning of the antenna position. The antenna
has to be adjusted to have maximum possible signal strength
and signal quality.
LNB Type
Select Universal for most standard LNBs, or Unicable if you
have a Unicable LNB.
Motor System
If a motorized dish is connected to the digital receiver, use this option to set the system used for sending
commands to the motor.
Motorized dish
If you select one of the options for motorized dish and press the “Yellow” function key, a new menu bar will be
open. Here, you are able to adjust and set the position of this satellite. The two level bar meters can be used
during adjustment. Use the color keys on the remote control, as shown at the bottom of the screen, to move the
dish and set the limits.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inverto IDL5550S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inverto IDL5550S in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info