509835
8
Zoom out
Zoom in
Previous page
1/66
Next page
1EnIDL5000HD-print.fh10 1/18/06 12:53 PM Page 8
Composite
C M Y CM MY CY CMY K
4.2 Output Mode Selection
After you have connected the AV cables for video and audio between your digital receiver and the display
device, check that the position of the output selection switch is correct for your chosen connection method
as in the table below.
Switch Position
A
B
C
Video Output Format
YPbPr
RGB
TV / CVBS
Receiver Mode
SD / HD
HD
SD
Switch on the digital receiver and the display device, and select
the correct AV input on the display device. The digital receiver
will take about 10 seconds to switch on. You may now start the
installation procedure.
The installation procedure is used to set up the video formats
that may be output from the digital receiver to the display device.
4.2.1 Installation Format Selection
Use the Remote Control keypad to perform the digital receiver
format testing and installation. Follow the digital receiver’s on-
screen instructions to do the installation.
4.2.2 Mode A (SD/HD, YPbPr)
The switch on the rear of the digital receiver must be in position
A, and the AV connections must be taken from the YPbPr RCA
sockets. The digital receiver display will show “HdcI”. Press
“Ok” to confirm the selection, or switch to another mode.
Proceed to INSTALLATION.
4.2.3 Mode B (HD, RGB)
The switch on the rear of the digital receiver must be in position
B, and the AV connections must be taken from the RGB HD15
socket. The digital receiver display will show “Hd r”. Press “Ok”
to confirm the selection, or switch to another mode. Proceed to
INSTALLATION.
4.2.4 Mode C (SD, CVBS)
The switch on the rear of the digital receiver must be in position
C, and the AV connections must be taken from the CVBS TV
RCA socket. The digital receiver display will show “Sdtv”. Press
“Ok” to confirm the selection, or switch to another mode. Proceed
to INSTALLATION.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inverto IDL-5000HD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inverto IDL-5000HD in the language / languages: English as an attachment in your email.

The manual is 2,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info