509835
7
Zoom out
Zoom in
Previous page
1/66
Next page
1EnIDL5000HD-print.fh10 1/18/06 12:53 PM Page 7
Composite
C M Y CM MY CY CMY K
4. Installing Your Receiver
4.1 Connections to the satellite antenna
4.1.1 Cable connection
Connect the dish cable to the HD receiver LNB IN connector.
Also connect the cable between your analogue receiver LNB
IN and RF OUT connector on the rear of the receiver.
(Refer to A)
4.1.2 Video Connections
Adjust switch on the rear panel according to the format supported
by your display device, and it contains three modes:
A, B and C
4.1.2.1 Mode A (SD/HD, YPbPr)
Connect the YPbPr component video output socket on your
digital receiver to your display device’s YPbPr component video
input. Be sure to match the colours on the RCA sockets with
the coloured plugs. (Refer to B)
Note: When unit is in Mode A, there is no video output from the
CVBS TV socket.
4.1.2.2 Mode B (HD, RGB)
Connect the D-sub socket to your display device. (Refer to C)
Note: Cable is not supplied.
4.1.2.3 Mode C (SD, TV / CVBS)
Connect the CVBS composite video output socket on your digital
receiver to your TV’s CVBS video input socket.
Connect the S-Video (Y/C) component video output socket on
your receiver to your TV’s S-Video input socket. (Refer to D)
Note: Cable is not supplied.
Note: When unit is in Mode C, there is no output from the
YPbPr sockets.
4.1.3 Audio Connections
If your TV set is equipped with Dolby Digital and/or MPEG audio
decoding capability, you may connect the Digital Audio output
by Optical or Coaxial RCA socket on your receiver to TV Digital
Audio input Optical or Coaxial RCA socket. (Refer to E) You
may also connect the digital audio output to your A/V receiver
assuming it is capable of decoding Dolby Digital /MPEG digital
audio stream.
If your TV set and/or A/V receiver does not support Dolby
Digital/MPEG decoding, you need to connect L/R Audio output
RCA sockets on your receiver to stereo L/R Audio inputs of TV
set and/or A/V receiver. (Refer to F). If your A/V receiver supports
Dolby Pro Logic decoder, you can switch ON
“Downmix-Surround” function.
(B) Mode A
(C) Mode B
(D) Mode C
(A)
(E)
(F)
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inverto IDL-5000HD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inverto IDL-5000HD in the language / languages: English as an attachment in your email.

The manual is 2,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info