808905

Inventum VWM9010W Manual

49
Zoom out
Zoom in
Previous page
1/104
Next page
CLEANING THE DRAIN PUMP FILTER
The pump filter can filter the yarns and small foreign matters from the washing. Especially after washing
fleecy, woolly or veryold laundry.
WARNING!
• Unplug the appliance to avoid electrical shock before cleaning.
• Be careful of hot water!
• Allow detergent solution to cool down.
• During cleaning, some water may be spilled. It is recommended to place an absorbent cloth on the floor.


Open the pump filter cap. Turn 90°, pull out the emergy
discharge hose and remove
thecap.
When there’s no more water
coming out, put the emergy
discharge hoseback.
Open the pump filter by turning
it counter clockwise. Clean the
pump filter under running water.
Remove any objects and
impurities from the filter
housing.
Place the pump filter back
and turn it clockwise to lock it.
Closethe pump filter cap.
WARNING!
•Never remove the pump filter cap during a washing cycle. Always wait until the appliance has finished the cycle,
and is empty.
•When the appliance is in use and depending on the selected program, there can be hot water in the pump.
•When replacing the pump filter cap, ensure it is securely snapped in place.
OPENING THE DOOR MANUALLY IN CASE OF A POWER OUTAGE - IN CASE OF A PROGRAM PAUSE
In case of a power outage during a washing cycle, the program will resume after the power is restored in most
cases. If not, you can manually open the door and remove the laundry.
WARNING!
• If there is still water in the appliance after a power outage, make sure not to open the door before you
manually drain thewater from the appliance via the pump filter (see the paragraph CLEANING THE DRAIN
PUMP FILTER).
1. When the program is paused or interrupted, open the pump filter cap.
2. The door of the appliance can only be opened by simultaneously pulling the special lever - next to the
filter -and the doorhandle.
3. Open the door manually by pulling the handle towards you.
•TROUBLE SHOOTING
The appliance will automatically control the operation of particular functions during the washing cycle. If any
irregularity occurs, this will be identified by reporting (E:XX) on the display. The appliance will report the error
until it is switched off. Disturbancesfrom the environment (e.g. the power grid) may result in various error
reports. In such case:
English •49
… 49 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum VWM9010W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum VWM9010W in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info