808905

Inventum VWM9010W Manual

37
Zoom out
Zoom in
Previous page
1/104
Next page
LEVELLING THE APPLIANCE
WARNING!
• The lock nuts on all four feet must be screwed tightly against the housing to ensure the appliance stands
steady on its feet.
Use a level and a spanner to level the appliance.
1. Loosen the lock nut with a spanner.
2. Turn the foot until it reaches the floor.
3. Level the appliance in longitudinal and traverse direction by rotating the
adjustable feet.
4. After adjusting the feet, firmly tighten the lock nuts with a spanner against
thehousing.
CONNECTING THE WATER SUPPLY HOSE
WARNING!
T
o prevent leakage or water damage, follow the instructions in this chapter.
• Make sure not to kink, crush or modify the water supply hose.
i
Tighten the water supply hose by hand, firmly enough for the
hose to have agood seal. After connecting the hose, the seal must
be checked for any leaks. Donot use pliers or similar tools when
connecting the water supply hose as this could damage the nut thread.
1. Connect the water supply hose to the water inlet valve on the
back of theappliance.
2. Connect the other end of the water supply hose with the aqua
stop to a water tap with cold water.
CONNECTING THE WATER DISCHARGE HOSE
WARNING!
• Make sure not to kink or protract the water discharge hose.
• Connect the water discharge hose properly, otherwise it could result in damage of water leakage.
Feed the water discharge hose into a drain pipe, wash basin or floor drain. Be careful not to feed the water
discharge hose too deep in the drain. Otherwise the waste water can not flow freely. The vertical distance
from the floor to the end of the discharge hose may no more be than 100 cm and no less than 60 cm.
1. Put the water discharge hose in a floor drain. 2. Connect the water discharge hose to a drain pipe.
Max. 100 cm
Min. 60 cm
oor drain
Max. 100 cm
Max. 100 cm
Min. 60 cm
English •37
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum VWM9010W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum VWM9010W in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info