808905

Inventum VWM9010W Manual

36
Zoom out
Zoom in
Previous page
1/104
Next page
installation and connection
3
REQUIRED SPACE FOR INSTALLING
WARNING!
• Stability is important to prevent the product from sliding across the installation site!
Make sure to level the appliance and install it on a stable base in longitudinal and
traverse direction by rotating the adjustable feet.
• Make sure the appliance doesn’t stand onto the power cord.
• Make sure to observe the minimum required clearances from the walls as indicated
in the figure.
i
The room in which the appliance is placed must meet the following requirements:
1. Dry, level and stable solide base
2. Avoid direct sunlight
3. Sufficient ventilation
4. Room temperature is above 5°C
5. Keep far away from heat sources such as coal, gas or wood burning appliances.
UNPACKING THE APPLIANCE
WARNING!
• Move the appliance with at least two people and wear protective clothing, such as sturdy gloves.
• Packaging material (e.g. films, styrofoam) can be dangerous for children.
• There is a risk of suffocation! Keep all packaging away from children.
1. Remove the cardboard box and the styrofoam packing.
2. Lift the washing machine and remove the base packaging. Make sure the small
triangle foam [A] is removed with the bottom packaging together. If not, lay the
appliance down on one side and carefully remove it manually.
3. Remove the tape securing the power supply cord and water discharge hose.
4. Take the water supply hose out of the drum.
REMOVING THE TRANSPORT BOLTS
WARNING!
Before the first use of the appliance, the transport bolts must be removed from the back of the appliance.
Ablocked appliance may be damaged when it is switched on for the first time. The warranty does not apply
in cases of such damage!
Loosen the 4 transport bolts
witha spanner.
Remove the bolts including
therubber parts and keep
them for future use
Close the holes using
thecovercaps
W ≥ 20 mm
A
36 • English
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum VWM9010W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum VWM9010W in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info