790021
47
Zoom out
Zoom in
Previous page
1/116
Next page
English 47
PAUSING THE WASHING PROGRAMME (ADDING/REMOVING LAUNDRY)
The washing programme can always be stopped by pressing the Start/Pause button. The washing programme is
temporarily paused while the time remaining until programme completion is flashing on the display unit.
If the water level in the drum is below a certain value and the water temperature is not too high, the door will
unlock afteracertain period of time. Open the door to add or remove laundry.
To resume the washing programme, first close the door and then press the Start/Pause button.
CANCELLING THE WASHING PROGRAMME
To stop and cancel a washing programme, press the On/Off/Reset button and hold it for more than 3 seconds.
Signallights will flash on the display. At the same time, the washing machine pumps the water out of the washing
machine drum. When the water is pumped out, the washing machine door will be unlocked. If the water in the
washing machine is hot, the washing machine will automatically cool it and pump/drain it out.
END OF THE WASHING PROGRAMME
The washing machine will indicate the end of the washing programme with an acoustic signal and »End« will appear on
the display until the washing machine switches into low standby mode or switches off. After 5 minutes, the »End« sign will
nolonger be displayed.
LOW STANDBY MODE
If you do not run any programme or choose any settings after switching on the washing machine (On/Off/Reset
button), the display unit will be switched off after 5 minutes and switched to standby mode in order to save energy.
The display unit will be reactivated if you rotate the programme selector knob or press the On/Off/Reset button.
If you do not do anything for 5 minutes after the end of a programme, the display unit will be switched off
tosavepower.
ERRORS
In case of an error or fault, the programme will be interrupted.
A flashing signal lights and an acoustic signal will warn about such an occurrence (see TROUBLESHOOTING TABLE),
and the error will be indicated on the display (E:XX).
POWER SUPPLY FAILURE
In case of a power supply failure, the washing programme is interrupted. When power supply resumes, »PF« (Power Failure)
will appear on the display unit. To resume the washing programme, press the Start/Pause button.
The delay time will not be reset.
Washing time will resume from the point at which the washing programme was interrupted.
PERSONAL SETTINGS
Basic or default settings for each washing programme can also be changed.
When you select the programme and additional functions, you may store such a combination by pressing the Start/Pause
button and holding it for five seconds. S C will appear on the display.
The programme will remain stored until it is changed using the same procedure. Personal settings can also be reset to factory
settings in the user menu.
PERSONAL SETTINGS MENU
Switch on the washing machine by pressing the On/Off/Reset button.
Simultaneously press Pre Wash [voorwas] and Start Delay [startuitstel] to open the Personal Settings Menu. Signal lights
for INTENSIVE [intensief], SHORT [kort], and EXTRA WATER (HIGH WATER LEVEL) will light up on the display unit.
Number 1 will appear on the LED display, which also indicates the settings function. Rotate the programme selector knob
tothe left orto the right to choose the function to change.
Number 1 indicates sound settings and number 2 indicates resetting of Personal programme settings to factory defaults.
Ifthedesired settings are not selected in 20 seconds, the programme will automatically return to the main menu.
Press the RPM [toeren] button (SPINNING RATE/DRAIN/PUMP STOP) to confirm the desired functions and their settings;
pressPreWash [voorwas] to go back one step.
ADD LAUNDRY
RESET
3 sec
RESET
3 sec
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum VWM9001B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum VWM9001B in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info