694976

Inventum VKI 3010 ZWA Manual

16
Zoom out
Zoom in
Previous page
1/40
Next page
before first use
3
Before using the induction cooker for the first time, proceed as follows: Unpack the induction cooker and remove all packaging
material. Keep the packaging (plastic bags and cardboard) out of the reach of children. After unpacking the appliance, check it for
external damage that may have occurred during transport. If still present, remove the protective film from the glass plate. Clean
the glass ceramic plate with a moist cloth. Check that the voltage stated on the information plate matches the voltage used in your
region.
For the installation of the cooker you must observe the instructions in section 7.
operation of the appliance
4
Only use pans that are suitable for an induction cooker and have the correct size with a cross-section from 15 to 20 cm.
The induction cooker works by means of electronic sensors that are operated by touching the touch control and/or control key. At
each touch of a touch control or control key, you can hear a sound signal. Make sure the operating section is always clean and dry.
Even a thin layer of water could prevent the keys from being operated.
• Check that the ventilation openings are not blocked and do not place cookware in the direct vicinity of the induction
cooker.
• Place a pan with food or liquid in the centre of a cooking zone.
• Insert the plug in the socket and a beep will sound. The indicator lights of both cooking zones flash on the display. The induction
cooker is now in standby position. As long as the induction cooker is in standby position, the indicator lights continue to flash.
• Press the [ ON/STANDBY ] key to select the required cooking zone.
• Press the [ MENU ] key to activate the required cooking zone. The cooking zone is ready for heating. The indicator light for
power lights up and the power is shown on the display.
• Turn the control key to the left [ - ] or right [ + ] to set the required power.
• Press the [ MENU ] key to change from power display to temperature display and vice versa. The indicator light for temperature
lights up and the temperature is shown on the display.
• If there is no pan on the cooking zone after switching on, the induction cooker will not get hot. The error message [ E0 ] appears
on the display and an alarm signal sounds to indicate that no pan has been placed. One minute later, the induction cooker
switches off automatically.
Cooking zone - Ø 17 cm Cooking zone - Ø 14 cm
Number of positions 10 10
Power range 200 - 1600 watts 200 - 1300 watts
Temperature range 60 - 240°C 60 - 240°C
SETTING THE TIMER
• Press the [ MENU ] key of the required cooking zone twice to set the timer. [ 0:00 ] flashes on the display. The indicator light
of the timer of the required cooking zone lights up. Turn the control key to the right [ + ] or left [ - ] to adjust the time. The timer
can be set from 1 minute to 3 hours.
• Once the time has been set, it will flash a number of times and then start to count down. The display will alternate between the
time and the temperature/power position.
• When the set time has passed, a beep sounds and the cooking zone switches off automatically. On the display you can see a
flashing [ OFF ] and the indicator light of the cooking zone flashes.
• The induction cooker switches off automatically after the maximum cooking time (3 hours) has passed, if you did not
set a time yourself.
SWITCHING OFF THE INDUCTION COOKER
• When the maximum cooking time or set time has passed, the induction cooker switches off automatically.
• Press the [ ON/STANDBY ] key to switch off the induction cooker manually.
Caution: the glass in the cooking zone area will be too hot to touch.
• After switch-off, the internal ventilation continues to run for approximately 1 more minute in order to cool the cooker.
• Remove the plug from the socket if you will not be using the cooker for a longer period of time.
16 • English
VKI3010ZWA-instructions.indd 16 13-9-2018 09:25:04
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum VKI 3010 ZWA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum VKI 3010 ZWA in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info