737419
41
Zoom out
Zoom in
Previous page
1/56
Next page
SETTING THE TIMER FUNCTION
The timer function can be used in two way: cooking timer and egg timer.
Cooking timer
The cooking timer is coupled to a cooking zone and can be set separately for each cooking zone. Contrary to the egg timer,
the cooking timer switches off the cooking zone when the set time has passed.
Switch on the cooking section with the ON/OFF key
and select a cooking zone .
Adjust the power with the + and - keys.
Press the TIMER key
and set the required cooking time with the + and - keys.
The burning LED indicates for which cooking zone the cooking timer has been set.
The cooking timer can be set independently on all operating cooking zones.
When more than one cooking timer is set on the display of the timer, the shortest time is shown. The flashing
LED indicates for which cooking zone this is.
When the set cooking time has expired, a beep sound can be heard. The beep sound stops automatically after 2 minutes or
after a random key has been touched.
The programmed cooking zone is switched off and [H] appears in the display if the area of the cooking zone is hot.
To set an additional cooking timer, proceed as follows:
Select a different cooking zone
.
Adjust the power with the + and - keys.
Press the TIMER key and set the required cooking time with the + and - keys.
The burning LED indicates for which cooking zone the cooking timer has been set.
10 seconds after the last setting, the display shows the time of the cooking zone of which the time expires first (if several
cooking zones are programmed). The accompanying LED flashes in the display.
To adjust the set cooking time, proceed as follows:
Select the required cooking zone
. The set power flashes in the display.
Press the TIMER key
Set the new required cooking time using the + and - keys.
Switching off the cooking timer manually, if necessary:
Select the cooking zone
of which you want to switch off the cooking timer. The set power lights up in the display.
Then press the TIMER key for 3 seconds or change the time with the + and - keys to 00.
Egg timer
The egg timer can be used as an extra alarm, without having a cooking timer set for one of the cooking zones.
Switch on the cooking section using the ON/OFF key
.
Then press the TIMER key and set the required cooking time with the + and - keys.
The egg timer can be set from 0 to 99 minutes. If no keys are pressed during 10 seconds, the egg timer starts automatically
and the time is counted down.
When the set time has passed, a beep sounds and the timer flashes. The beep sound stops automatically after 2 minutes or
after a random key has been touched.
To change the time, press the TIMER key
once more and adjust the time with the + and - keys.
DISPLAY INDICATION
Indication on the display Description
/
Residual heat indicator: the cooking zone is still warm.
Heat mode is active.
Boost mode is active.
Quick boil timer is active.
There is no pan or there is an unsuitable pan on the active cooking zone.
English 41
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum VFI6042 ZWA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum VFI6042 ZWA in the language / languages: English, Dutch as an attachment in your email.

The manual is 14,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Inventum VFI6042 ZWA

Inventum VFI6042 ZWA User Manual - German, French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info