737431
38
Zoom out
Zoom in
Previous page
1/108
Next page
38 English
use of the oven
5
Important! In cookers equipped with the electronic timer, the time [0.00] will start flashing in the display field upon
connection to the power supply. Set the timer with the current time. If the current time is not set, operation of the oven is
impossible.
ELECTRONIC TIMER
OK - button to select mode of operation
> - plus button [ + ]
< - minus button [ - ]
- appliance on indicator
- minute minder indicator
- duration indicator
- end time indicator
SETTING THE CURRENT TIME
After connection to the mains or reconnection after a power cut the display shows flash 0.00.
Press the [ OK ] key to set the current time for the first time. The display will show the symbol .
Press and hold the keys [ < ] / [ > ] within 7 seconds to set the current time.
To store the new time setting, wait approximately 7 seconds after the time has been set. The dot below the symbol will
stop flashing.
To adjust the time later, press the keys [ < ] and [ > ] simultaneously and adjust the current time while the dot below the
symbol is flashing.
To store the new time setting, wait approximately 7 seconds after the time has been set. The dot below the symbol will
stop flashing. The current time is adjusted.
Note: The oven can be turned on when you see the symbol on the display.
MINUTE MINDER
The minute minder can be activated at any time, regardless of the status of other functions. The minute minder can be set
from 1 minute up to 23 hours and 59 minutes.
Press the [ OK ] key. The symbol flashes on the display.
Set the minute minder using the keys [ < ] and [ > ]. The display shows the set time and
the symbol indicates the minute minder is activated.
As soon as the set time has passed an alarm signal will sound and the symbol flashes.
Press and hold any key to mute the alarm. The symbol will be off and the display will show
the current time after approximately 7 seconds.
Note! If no key is touched, the alarm will turn off automatically after approximately 7 minutes.
SEMI-AUTOMATIC OPERATION
Use this function if the oven is to be switched off after a specific duration.
Set the oven function knob and the temperature knob to the setting at which you want the
oven to operate.
Press the [ OK ] key until the display shows dur and the symbol flashes.
Set the required preparation time using the keys [ < ] or [ > ]. The preparation time can be set
from 1 minute to 10 hours.
The set time will be saved in the memory after about 7 seconds. The display will show the
current time and the symbol.
Once the preparation time has elapsed the oven will turn off automatically. You will hear an
alarm and the symbols and will be flashing.
Press and hold any key to mute the alarm. The symbols and will be off and the display will show the current time
after approximately 7 seconds.
Turn the knobs for the oven function and the temperature to the off setting [ 0 /
].
OK
OK
OK
OK
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum VFI5042RVS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum VFI5042RVS in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 27,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Inventum VFI5042RVS

Inventum VFI5042RVS User Manual - English, German, Dutch, French - 108 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info