694996

Inventum VFG6034 WG Manual

30
Zoom out
Zoom in
Previous page
1/92
Next page
• Before you start using the cooker it should be leveled, which is particularly important for fat distribution in a frying pan. To
this purpose, the adjustable feet are accessible after removal of the drawer. The adjustment range is � 5 mm.
MOUNTING THE OVERTURNING PREVENTION BRACKET
The bracket is mounted to prevent overturning of the cooker. When the
overturning prevention bracket is installed, a child who climbs on the oven
door will not overturn the appliance.
Cooker, height 850 mm
A = 60 mm
B = 103 mm
Cooker, height 900 mm
A = 104 mm
B = 147 mm
A
B
GAS CONNECTION
Caution!
The cooker should be connected to a gas supply of the particular type of gas that the appliance is manufactured
to function with. Information about the type of gas that the cooker has been adapted to by the factory is shown
on the rating label. The cooker should be connected exclusively by an appropriately authorised fitter and only
that person has the right to adapt the cooker to a different type of gas. .
Fitting guidelines
A fitter should:
• have a gas fitter's authorisation;
• be acquainted with the information included on the rating label of the cooker about the type of gas to which the cooker is
adapted; the information should be compared with the gas supply conditions at the place of installation;
• check:
- airing efficiency, that is effeciency of air exchange in the rooms;
- tightness of gas fitting connections;
- effectiveness of alle functional elements of the cooker;
- if the electricity supply is adapted to function with a safety ground lead (zero).
• check the settings of the control knobs for the burnersde to ensure good functioning of the ingition and the
thermocouple.
Caution!
The cooker may only be connected to a liquid gas cylinder of the existing gas supply by an authorised fitter, observing all
safety rules.
Connection with a flexible steel hose
If the cooker is connected according to the class 2 specifications, sub-class I, only flexible metal hose can be used which
meet the valid national regulations. Gas feeding connector must be G ½” threaded coupling. Use only pipes and fittings that
meet the requirements of the valid standards. Maximum admissible length of the flexible hose is 2000 mm. Make sure the
connection is not touching any mobile elements which could damage the hose.
30 • English
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum VFG6034 WG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum VFG6034 WG in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 7,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info