694975
18
Zoom out
Zoom in
Previous page
1/40
Next page
18 English
troubleshooting
7
Abnormalities Key checking points and trouble shooting
After plugging in the power cord and pressing the [
ON/STANDBY ] key, the power indicator and display
do not light up.
• Is the power plug properly connected?
• Is the power outlet, fuse or power cord damaged?
The induction hotplate makes noise.
The electronics of the induction hotplate needs ventilation. It is normal you
hear the fan making noise.
The [ ON/STANDBY ] indicator lights up and the
display works normally, but heating does not start.
• Is the pot made of the proper material?
• For other causes, please contact the customer service department.
Heating suddenly stops during the process.
• Is the temperature of the oil too high when frying dishes?
• Is the temperature of the surroundings very high?
• Is the air inlet or air outlet of the induction cooker blocked?
• Is the default heating time of the induction cooker over?
• The self-safety protection of the induction cooker starts, wait for several
minutes and re-connect power to use it.
Code of failure
E3 E6
• Wait a moment and press the [ ON/STANDBY ] key when the temperature
of the hotplate becomes normal, the induction hotplate will operate as
usual.
E7 E8
• Turn off the hotplate, when the voltage becomes normal, and then turn on
the hotplate. It will operate as usual.
E1 E2 E4
E5 Eb
• Please contact the customer service department.
Technical specifications KI120T
Type of appliance Freestanding hob
Heating technology Induction
Number of cooking zones 1
Diameter per cooking zone (cm) 19.5
Energy consumption per cooking zone (Wh/kg) 199.5
Energy consumption of the appliance (Wh/kg) 199.5
It is recommended to select power setting level 2 to achieve maximum energy efficiency.
The energy consumption of a domestic electric hob (EC electric hob) is measured in Wh per kg of water heated in a normalized
measurement (Wh/kg) considering all cookware pieces under standardized test conditions and rounded to the first decimal place.
Standard EN 60350-2:2013 was used as reference for the measurement and calculation.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum KI 120T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum KI 120T in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info