Manual Inventum KI 120T (page 17 of 40) (English, German, Dutch, French)

694975

Zoom out

Zoom in

1/40

English • 17

cookware for induction

Cookware which has been used on other cookers, such as a gas hob, are no longer suitable for use on an induction cooker.

Therefore purchase before the ﬁrst use new cookware if you do not have suitable pans.

• Requirement for pot materials: containing magnetic inducting materials. Cookware made of steel, enamelled steel, cast iron and

stainless steel will give the best results.

• Use thick, ﬂat smooth bottomed cookware that are the same diameter as the cooking zone. This will help reduce cooking times.

• Shape requirement for pans: ﬂat bottom, with the diameter more than 15 cm and less than 20 cm. The cooking zone is a circle with

the intersection as the center of circle, with a diameter more than 15 cm and less than 20 cm.

• After the ﬁrst use, some white spots would appear at the bottom of the pot. This is normal. Please pour some vinegar into the pot,

heat it at about 60-80°C, then wipe the spots away with brush.

• Incompatible pots material: glass, ceramic, aluminium, copper and other non magnetic material.

• when the pot is removed, the induction cooker will stop heating immediately. After the buzzer sounds for 1 minute, it will

go into standby mode automatically.

• Cookware must be placed centrally on the cooking zone.

• When using certain pans, you may get various noises from the pans, this is due to the design of the pans and does not effect the

performance or safety of the cooker.

ENERGY SAVING TIPS

• Place the cookware on the cooking zone before it is switched on. If it is switched on before placing any cookware, the cooking zone

will not operate.

• Always use a lid to reduce cooking time.

• Decrease the temperature/ power level setting when a liquid comes to the boil.

• Minimise the amount of liquid or fat to reduce cooking times.

• Select the correct setting for the several cooking options.

cleaning & maintenance

Before cleaning, always make sure the appliance is switched off and disconnect the power plug from the power outlet. Wait till the

cooker plate of the induction cooker is not hot and before cleaning.

• Do not use abrasive pads, corrosive cleaners, aerosol cleaners or sharp objects to clean the surface of the cooker which

are not intended for this purpose.

• After using the induction cooker for a long time, the opening of air inlet/air outlet will pile up with dust or other dirt, please wipe it

with a soft dry cloth. Dust in the air inlet and outlet can be cleaned by using a soft brush or a mini vacuum cleaner.

Note: Please do not rinse it with water.

• Clean the surface daily with a damp cloth and a mild detergent, such as washing-up liquid. Dry thoroughly with kitchen paper or a

clean cloth.

• For oil spots on the cooker plate, wipe the cooker plate by using a soft moist cloth with a little tooth paste or mild detergent. And

then use a soft moist cloth to wipe it until no stain remains.

• When not using it for a long time, please disconnect the power plug from the power outlet and protect the induction cooker from

any dust or bugs.

• Spilt food can be removed by soaking the spot with a damp cloth and some washing-up liquid or a special scraper. Attention: the

glass scraper has a razor, therefore, it must be kept away from children.

• Use a special cleaner for ceramic/induction hobs for difﬁcult stains. Attention: follow the instructions on the product.

Iron frying pan Stainless steel pot Enamel cooking

utensil

Cast iron plate Enamel stainless

steel kettle

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Inventum KI 120T in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Inventum KI 120T Manual

Product: