Manual Inventum IKI9045FLOW (page 26 of 44) (English, German, Dutch, French)

737416

Zoom out

Zoom in

1/44

2. Remove the cover (A).

3. Remove the screws.

4. Loosen the plastic locking pin. Use a screwdriver.

5. Remove the extension together with the duct adapter marked 1 (B).

Replacing the duct adapter

1. Remove the screws.

2. Remove the duct adapter marked 1 from the extension (C).

3. Attach the duct adapter marked 2 to the extension. Use the screws.

Installing duct adapter 2

1. Put the plastic locking pin in the opening.

2. Attach the extension together with the duct adapter marked 2 (D).

3. Install the cover (E). Use the screws.

INSTALLING THE COOKER HOOD

Caution:

For kitchen cabinets with a depth up to 750 mm or with a depth of more than 810 mm, it is necessary to

replace the duct adapter before installing the cooker hood. Refer to section

'Replacing the duct adapter'

1. Put the cooker hood (A) in the kitchen cabinet.

2. Attach the cooker hood to the duct. Use the screws.

3. Install the cover (B). Use the screws.

4. Install the joint for the pipes (C). Use the screws.

INSTALLING THE ELECTRICAL CONNECTIONS

1. Connect the connectors for the controls (A).

2. Connect the connectors for the sensor (B).

3. Install the mains plug for the two mains cables of the induction hob.

Note:

The mains cable of the cooker hood is supplied with a mains plug.

INSTALLING THE FILTERING KIT (OPTIONAL)

1. Prepare the plinth of the kitchen cabinet according to the dimensions of the box for the filter.

Note:

Make sure that the grid and the filter are removed.

2. Connect one side of the flexible pipe (A) to the joint (B) on the cooker hood. Use the tape.

3. Connect the other side of the flexible pipe to the box of the filter (C). Use the tape.

4. Install the box of the filter to the cabinet:

a. Use the knobs to fit the box between the cabinet and the floor.

b. Use the screws to attach the box directly to the cabinet.

5. Put the carbon filter (D) in the box of the filter.

6. Install the grid (E).

(Figure 13)

(Figure 14)

(Figure 15)

(Figure 16)

(Figure 17)

(Figure 18)

(Figure 19)

(Figure 20)

(Figure 21)

(Figure 22)

(Figure 23)

(Figure 24)

(Figure 25)

26 • English

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Inventum IKI9045FLOW in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Inventum IKI9045FLOW

Inventum IKI9045FLOW User Manual - English, German, Dutch, French - 84 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Inventum IKI9045FLOW Manual

Product: