737416

Inventum IKI9045FLOW Manual

25
Zoom out
Zoom in
Previous page
1/44
Next page
2. Make sure that the cabinet is prepared according to the dimensions of the cooker hood
©
).
Note:
If necessary, you can remove the back of the cabinet.
Note:
If the installation includes a plasma filter, the opening in the cabinet has to be 660 mm.
3. Install the seal for non-flush installations of the induction hob. Refer to section
'Installing the seal'
.
For an overview of the items for installing the appliance, refer to section
'Installation items'
.
For an overview of the items for installing the accessories, refer to section
'Accessories'
.
INSTALLING THE SEAL
Caution:
The seal must be installed before you install the induction hob. Do not install the appliance without the
seal.
Note:
This procedure is only valid for non-flush installtions of the appliance.
1. Remove the protective film (B) from the seal (A).
2. Put the seal around the appliance. Make sure that there is a distance of 2 mm between the appliance and the
seal.
INSTALLING THE INDUCTION HOB
Caution:
Do not block the ventilation openings of the appliance.
Non-flush installation
1. Put the appliance in the opening of the worktop.
Flush installation
1. Apply sealant along the edges of the appliance.
2. Put the appliance in the opening of the worktop.
3. Remove too much sealant.
CHANGING THE OUTPUT DIRECTION OF THE MOTOR
The output direction of the motor can be on the left or on the right side of the cooker hood.
1. Remove the screws.
2. Remove the two covers (A) and (B).
3. Turn the motor (C) to the opposite direction.
4. Install the two covers. Use the screws.
REPLACING THE DUCT ADAPTER
For kitchen cabinets with a depth up to 750 mm or with a depth of more than 810 mm you can replace the duct
adapter to increase the space for the drawers.
Removing duct adapter 1
1. Remove the screws.
(Figure 9)
(Figure 10)
(Figure 11)
(Figure 11)
(Figure 12)
English • 25
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum IKI9045FLOW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum IKI9045FLOW in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Inventum IKI9045FLOW

Inventum IKI9045FLOW User Manual - English, German, Dutch, French - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info